Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Electric Dryer Replace Moisture Sensor #134786100
Electrolux Electric Dryer Replace Moisture Sensor #134786100
Skill Level
Total Parts Cost
$78.94Estimated Savings
$112.5002:03
- Description
This video provides step-by-step instructions for replacing the moisture sensor on Electrolux electric dryers. The most common reason for replacing the moisture sensor is the dryer running too long.
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this moisture sensor replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this moisture sensor replacement video is applicable to the following brands: Electrolux
Step By Step Instructions
1
Before you replace the moisture sensor in your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screw securing the rear access panel and remove the panel.
3
Detach the moisture sensor wires.
4
Open the dryer door and unthread the mounting screw securing the moisture sensor.
5
Pull the old sensor away from the rear bulkhead.
6
Install the new moisture sensor by positioning it on the rear bulkhead then replace the mounting screw to secure.
7
Connect the wires to the terminals
8
Replace the rear access panel and secure it with the screw.
9
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the moisture sensor on Electrolux electric dryers. The most common reason for replacing the moisture sensor is the dryer running too long.
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this moisture sensor replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this moisture sensor replacement video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Before you replace the moisture sensor in your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screw securing the rear access panel and remove the panel.
3
Detach the moisture sensor wires.
4
Open the dryer door and unthread the mounting screw securing the moisture sensor.
5
Pull the old sensor away from the rear bulkhead.
6
Install the new moisture sensor by positioning it on the rear bulkhead then replace the mounting screw to secure.
7
Connect the wires to the terminals
8
Replace the rear access panel and secure it with the screw.
9
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Moisture Sensor
$78.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com