Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Electric Dryer Mounting Clip Replacement #137034500
Electrolux Electric Dryer Mounting Clip Replacement #137034500
Skill Level
Total Parts Cost
$52.94Estimated Savings
$112.5004:27
- Description
This video provides step-by-step instructions for replacing the mounting clip on Electrolux electric dryers. The most common reason for replacing the mounting clip is if the front panel is loose.
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this mounting clip replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this mounting clip replacement video is applicable to the following brands: Electrolux
Step By Step Instructions
1
Before you replace a front panel mounting clip on your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws at the back securing the main top.
3
Slide the main top back and lift it up to remove.
4
Next, unthread the screws securing the control panel mounting brackets to the frame.
5
With the screws removed, lift the panel up and use a small flat-head screwdriver to depress the retaining tab to release the wire connecter.
6
Open the dryer door and unthread the two screws on the front panel securing the lint filter housing cover.
7
Lift and support the dryer then unthread the bottom front panel mounting screws.
8
With the screws unthreaded, remove the support and unthread the top front panel mounting screws.
9
Lift the panel up and out.
10
Disconnect the door switch wire connecter to fully remove the front panel.
11
If necessary, remove any remnants of the mounting clip you’re replacing.
12
Install the new mounting clip by hooking it onto the front panel with the tab at the top.
13
Reinstall the front panel by first reconnecting the door switch wire connecter.
14
Now hook the front panel tabs on the slots in the frame.
15
Replace the panel mounting screws on top.
16
Lift and support the dryer to replace the bottom mounting screws.
17
Thread and tighten the two screws to secure the lint filter housing cover to the front panel.
18
Connect the wire connecter to the user control board.
19
Reposition the control panel and replace the screws to secure the brackets.
20
Realign the main top and slide it into place.
21
Rethread the screws in the back.
22
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the mounting clip on Electrolux electric dryers. The most common reason for replacing the mounting clip is if the front panel is loose.
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this mounting clip replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, phillips head screwdriver, flat head screwdriver
All of the information in this mounting clip replacement video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Before you replace a front panel mounting clip on your dryer be sure to unplug the power cord.
2
Use a number two square bit or a phillips-head screwdriver to unthread the screws at the back securing the main top.
3
Slide the main top back and lift it up to remove.
4
Next, unthread the screws securing the control panel mounting brackets to the frame.
5
With the screws removed, lift the panel up and use a small flat-head screwdriver to depress the retaining tab to release the wire connecter.
6
Open the dryer door and unthread the two screws on the front panel securing the lint filter housing cover.
7
Lift and support the dryer then unthread the bottom front panel mounting screws.
8
With the screws unthreaded, remove the support and unthread the top front panel mounting screws.
9
Lift the panel up and out.
10
Disconnect the door switch wire connecter to fully remove the front panel.
11
If necessary, remove any remnants of the mounting clip you’re replacing.
12
Install the new mounting clip by hooking it onto the front panel with the tab at the top.
13
Reinstall the front panel by first reconnecting the door switch wire connecter.
14
Now hook the front panel tabs on the slots in the frame.
15
Replace the panel mounting screws on top.
16
Lift and support the dryer to replace the bottom mounting screws.
17
Thread and tighten the two screws to secure the lint filter housing cover to the front panel.
18
Connect the wire connecter to the user control board.
19
Reposition the control panel and replace the screws to secure the brackets.
20
Realign the main top and slide it into place.
21
Rethread the screws in the back.
22
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Mounting Clip
$52.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com