Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Electric Dryer Filter Housing Cover #137560800
Electrolux Electric Dryer Filter Housing Cover #137560800
Skill Level
Total Parts Cost
$38.14Estimated Savings
$112.5001:57
- Description
This video provides step-by-step instructions for replacing the filter housing cover on Electrolux electric dryers. The most common reason for replacing the cover is if it is cracked.
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Step By Step Instructions
1
Before you replace the lint filter housing cover on your dryer be sure to unplug the power cord.
2
Open the dryer door and remove the lint filter.
3
Use a number two square bit or a phillips-head screwdriver to unthread the four mounting screws securing the old lint filter housing cover.
4
Lift out the old cover.
5
Install the new lint filter housing cover by aligning it on the front bulkhead.
6
Thread and tighten the screws to secure.
7
Insert the lint filter and close the dryer door.
8
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the filter housing cover on Electrolux electric dryers. The most common reason for replacing the cover is if it is cracked.
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Parts used: #2 square bit, Phillips head screwdriver, flat head screwdriver
All of the information in this cover replacement video is applicable to the following brands: Electrolux
Step-By-Step Instructions
1
Before you replace the lint filter housing cover on your dryer be sure to unplug the power cord.
2
Open the dryer door and remove the lint filter.
3
Use a number two square bit or a phillips-head screwdriver to unthread the four mounting screws securing the old lint filter housing cover.
4
Lift out the old cover.
5
Install the new lint filter housing cover by aligning it on the front bulkhead.
6
Thread and tighten the screws to secure.
7
Insert the lint filter and close the dryer door.
8
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Air Grille
$38.14
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com