Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Lawn Mower Handle Lock Knob Replacement Part # 53125-VL0-B00ZA
Honda Lawn Mower Handle Lock Knob Replacement Part # 53125-VL0-B00ZA
Skill Level
Total Parts Cost
$7.04Estimated Savings
$112.5001:34
- Description
This video provides step-by-step repair instructions for replacing the handle lock knob on a Honda lawn mower. The most common reason for replacing the knob is if the handle will not stay in place.
All of the information for this knob replacement video is applicable to the following brands:
Honda
Tools needed: 1/16 inch punch, rubber mallet
All of the information for this knob replacement video is applicable to the following brands:
Honda
Tools needed: 1/16 inch punch, rubber mallet
Step By Step Instructions
1
To replace a handle lock knob on your lawn mower first remove the grass bag if applicable.
2
Rotate the handle lock knobs a quarter-turn to release the lock pins.
3
Lift the handle up.
4
Rotate the knob you’re replacing another quarter-turn to release the spring tension then use a 1/16th inch punch and a rubber mallet to knock out the roll pin securing the knob. You can now remove the knob and lock pin assembly.
5
Before you install the new handle lock knob make sure the spring is positioned on the lock pin and the pin has been inserted into the collar.
6
Now align the hole in the knob with the hole in the lock pin.
7
Insert the roll pin and use the punch and mallet to knock it into place.
8
Rotate the knob a quarter-turn
9
Lower the handle to the desired position then rotate both knobs a quarter-turn to secure.
Description
This video provides step-by-step repair instructions for replacing the handle lock knob on a Honda lawn mower. The most common reason for replacing the knob is if the handle will not stay in place.
All of the information for this knob replacement video is applicable to the following brands:
Honda
Tools needed: 1/16 inch punch, rubber mallet
All of the information for this knob replacement video is applicable to the following brands:
Honda
Tools needed: 1/16 inch punch, rubber mallet
Step-By-Step Instructions
1
To replace a handle lock knob on your lawn mower first remove the grass bag if applicable.
2
Rotate the handle lock knobs a quarter-turn to release the lock pins.
3
Lift the handle up.
4
Rotate the knob you’re replacing another quarter-turn to release the spring tension then use a 1/16th inch punch and a rubber mallet to knock out the roll pin securing the knob. You can now remove the knob and lock pin assembly.
5
Before you install the new handle lock knob make sure the spring is positioned on the lock pin and the pin has been inserted into the collar.
6
Now align the hole in the knob with the hole in the lock pin.
7
Insert the roll pin and use the punch and mallet to knock it into place.
8
Rotate the knob a quarter-turn
9
Lower the handle to the desired position then rotate both knobs a quarter-turn to secure.
Applicable Product Model
Parts Needed
Knob
$7.04
Total$0.00
Related Articles & Videos
04:36
Part Replacement
Honda Lawn Mower Replace Left Rear Wheel Support Part # 42940-VG3-B01
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com