Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Lawn Mower Trail Shield Shaft Part # 76138-VG3-010
Honda Lawn Mower Trail Shield Shaft Part # 76138-VG3-010
Skill Level
Total Parts Cost
$2.96Estimated Savings
$112.5001:17
- Description
This video provides step-by-step repair instructions for replacing the trail shield shaft on a Honda lawn mower. The most common reason for replacing the shaft is when it is damaged.
All of the information for this trail shield shaft replacement video is applicable to the following brands:
Honda
Tools needed: pliers, needle nose pliers, hacksaw
All of the information for this trail shield shaft replacement video is applicable to the following brands:
Honda
Tools needed: pliers, needle nose pliers, hacksaw
Step By Step Instructions
1
Before you replace the trail shield shaft on your lawn mower remove the grass bag if applicable.
2
Use pliers to secure the end of the shaft and a hack saw to cut off the crimped end.
3
Use needle-nose pliers to pull off the retainer clip.
4
You can now slide out the old shaft.
5
Install the new trail shield shaft by first repositioning the trail shield within the frame.
6
Now insert the new shaft through the right side to hold the shield in place.
7
We recommend using a new retainer clip to secure the shaft.
Description
This video provides step-by-step repair instructions for replacing the trail shield shaft on a Honda lawn mower. The most common reason for replacing the shaft is when it is damaged.
All of the information for this trail shield shaft replacement video is applicable to the following brands:
Honda
Tools needed: pliers, needle nose pliers, hacksaw
All of the information for this trail shield shaft replacement video is applicable to the following brands:
Honda
Tools needed: pliers, needle nose pliers, hacksaw
Step-By-Step Instructions
1
Before you replace the trail shield shaft on your lawn mower remove the grass bag if applicable.
2
Use pliers to secure the end of the shaft and a hack saw to cut off the crimped end.
3
Use needle-nose pliers to pull off the retainer clip.
4
You can now slide out the old shaft.
5
Install the new trail shield shaft by first repositioning the trail shield within the frame.
6
Now insert the new shaft through the right side to hold the shield in place.
7
We recommend using a new retainer clip to secure the shaft.
Applicable Product Model
Related Articles & Videos
04:36
Part Replacement
Honda Lawn Mower Replace Left Rear Wheel Support Part # 42940-VG3-B01
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com