Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Lawn Mower Blade Adapter Replacement Part # 06726-VG3-305
Honda Lawn Mower Blade Adapter Replacement Part # 06726-VG3-305
Skill Level
Total Parts Cost
$104.02Estimated Savings
$112.5003:31
- Description
This video provides step-by-step repair instructions for replacing the blade adapter on a Honda lawn mower. The most common reason for replacing the adapter is when the blades are not secured properly.
All of the information for this blade adapter replacement video is applicable to the following brands:
Honda
Tools needed: 12mm socket, rubber mallet, torque wrench
All of the information for this blade adapter replacement video is applicable to the following brands:
Honda
Tools needed: 12mm socket, rubber mallet, torque wrench
Step By Step Instructions
1
Before you replace the blade adapter on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
We recommend performing this procedure with little or not fuel in the tank.
4
Now carefully tip the mower on its side with the fuel tank facing up.
5
Support the blades and use a 14mm socket to unthread the mounting bolts.
6
Remove the blades.
7
Support the blade adapter and unthread the adapter mounting bolt. You can use a rubber mallet to help remove the old adapter.
8
Before you install the new blade adapter replace the old woodruff key in the drive shaft with the new key.
9
Align the new adapter on the shaft and slide it into place.
10
Thread and tighten the mounting bolt. Use a torque wrench to torque the bolt to 40 foot pounds.
11
Transfer the washers from the old blade mounting bolts to the new ones keeping the cupped edge facing up.
12
Align the upper blade and the lower main blade together insert the bolts then position the assembly on the adapter.
13
Thread the bolts and torque the bolts to 40 foot pounds to secure.
14
Return the mower to its upright position.
15
With the repair completed reattach the wire and boot to the spark plug open the fuel valve refill the fuel tank and your lawn mower should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the blade adapter on a Honda lawn mower. The most common reason for replacing the adapter is when the blades are not secured properly.
All of the information for this blade adapter replacement video is applicable to the following brands:
Honda
Tools needed: 12mm socket, rubber mallet, torque wrench
All of the information for this blade adapter replacement video is applicable to the following brands:
Honda
Tools needed: 12mm socket, rubber mallet, torque wrench
Step-By-Step Instructions
1
Before you replace the blade adapter on your lawn mower first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
We recommend performing this procedure with little or not fuel in the tank.
4
Now carefully tip the mower on its side with the fuel tank facing up.
5
Support the blades and use a 14mm socket to unthread the mounting bolts.
6
Remove the blades.
7
Support the blade adapter and unthread the adapter mounting bolt. You can use a rubber mallet to help remove the old adapter.
8
Before you install the new blade adapter replace the old woodruff key in the drive shaft with the new key.
9
Align the new adapter on the shaft and slide it into place.
10
Thread and tighten the mounting bolt. Use a torque wrench to torque the bolt to 40 foot pounds.
11
Transfer the washers from the old blade mounting bolts to the new ones keeping the cupped edge facing up.
12
Align the upper blade and the lower main blade together insert the bolts then position the assembly on the adapter.
13
Thread the bolts and torque the bolts to 40 foot pounds to secure.
14
Return the mower to its upright position.
15
With the repair completed reattach the wire and boot to the spark plug open the fuel valve refill the fuel tank and your lawn mower should be ready for use.
Applicable Product Model
Parts Needed
Blade Adapter
$104.02
Total$0.00
Related Articles & Videos
04:36
Part Replacement
Honda Lawn Mower Replace Left Rear Wheel Support Part # 42940-VG3-B01
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com