Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Lawn Mower Stopper Lever Replacement Part # 54315-VH7-K00
Honda Lawn Mower Stopper Lever Replacement Part # 54315-VH7-K00
Skill Level
Total Parts Cost
$1.74Estimated Savings
$112.5001:08
- Description
This video provides step-by-step repair instructions for replacing the stopper lever on a Honda lawn mower. The most common reason for replacing the stopper lever is when it is damaged.
All of the information for this stopper lever replacement video is applicable to the following brands:
Honda
Tools needed: flat head screwdriver
All of the information for this stopper lever replacement video is applicable to the following brands:
Honda
Tools needed: flat head screwdriver
Step By Step Instructions
1
To replace the bail arm stopper lever on your lawn mower detach the bail arm from the left side of the handle to release it then disconnect the z-end of the brake cable.
2
Use a flat-head screwdriver to pry out the center of the locking pin securing the stopper lever and fully remove the pin.
3
Slide the old stopper lever up to remove.
4
Install the new bail arm stopper lever by sliding it into place on the handle.
5
Insert the locking pin into the lever then push in the center of the pin to secure.
6
Reinstall the bail arm by first attaching the z-end of the brake cable.
7
Now position the right end of the arm in the handle followed by the left end. Your lawn mower should now be ready for use.
Description
This video provides step-by-step repair instructions for replacing the stopper lever on a Honda lawn mower. The most common reason for replacing the stopper lever is when it is damaged.
All of the information for this stopper lever replacement video is applicable to the following brands:
Honda
Tools needed: flat head screwdriver
All of the information for this stopper lever replacement video is applicable to the following brands:
Honda
Tools needed: flat head screwdriver
Step-By-Step Instructions
1
To replace the bail arm stopper lever on your lawn mower detach the bail arm from the left side of the handle to release it then disconnect the z-end of the brake cable.
2
Use a flat-head screwdriver to pry out the center of the locking pin securing the stopper lever and fully remove the pin.
3
Slide the old stopper lever up to remove.
4
Install the new bail arm stopper lever by sliding it into place on the handle.
5
Insert the locking pin into the lever then push in the center of the pin to secure.
6
Reinstall the bail arm by first attaching the z-end of the brake cable.
7
Now position the right end of the arm in the handle followed by the left end. Your lawn mower should now be ready for use.
Applicable Product Model
Parts Needed
Flange
$1.74
Total$0.00
Related Articles & Videos
04:36
Part Replacement
Honda Lawn Mower Replace Left Rear Wheel Support Part # 42940-VG3-B01
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com