Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Small Engine Intake Gasket Replacement #16212-Z8B-900
Honda Small Engine Intake Gasket Replacement #16212-Z8B-900
Skill Level
Total Parts Cost
$1.16Estimated Savings
$112.5002:40
- Description
This video provides step-by-step instructions for replacing an intake gasket on Honda small engines. The most common reason for replacing a gasket is if it is damaged or missing, which can allow foreign materials to enter the engine's intake, causing it to run poorly or not at all.
All of the information in this intake gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
All of the information in this intake gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
Step By Step Instructions
1
Before you replace the intake gasket on your engine’s carburetor first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Remove the loose components.
6
Before you install the new intake gasket insert the bolts through the air filter housing.
7
Slide on the air cleaner gasket followed by the carburetor.
8
Now slide on the air guide gasket followed by the choke control assembly.
9
Slide on the new intake gasket then thread the bolts into the engine and tighten to secure.
10
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
11
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Description
This video provides step-by-step instructions for replacing an intake gasket on Honda small engines. The most common reason for replacing a gasket is if it is damaged or missing, which can allow foreign materials to enter the engine's intake, causing it to run poorly or not at all.
All of the information in this intake gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
All of the information in this intake gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
Step-By-Step Instructions
1
Before you replace the intake gasket on your engine’s carburetor first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Remove the loose components.
6
Before you install the new intake gasket insert the bolts through the air filter housing.
7
Slide on the air cleaner gasket followed by the carburetor.
8
Now slide on the air guide gasket followed by the choke control assembly.
9
Slide on the new intake gasket then thread the bolts into the engine and tighten to secure.
10
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
11
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Applicable Product Model
Parts Needed
Gasket
$1.16
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com