Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Small Engine Recoil Starter Replacement #28400-Z8B-901ZB
Honda Small Engine Recoil Starter Replacement #28400-Z8B-901ZB
Skill Level
Total Parts Cost
$15.44Estimated Savings
$112.5001:49
- Description
This video provides step-by-step instructions for replacing a recoil starter on Honda small engines. The most common reason for replacing a starter is if it is damaged or will not engage with the drive shaft.
All of the information in this recoil starter replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
All of the information in this recoil starter replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
Step By Step Instructions
1
Before you replace the recoil starter on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Release the starter rope from the guide and note the orientation of the starter.
4
Now use a 10mm socket to unthread the mounting nuts securing the starter.
5
Remove the old starter.
6
Install the new recoil starter by properly aligning it on the engine shroud then thread and tighten the mounting nuts to secure.
7
Depress the bail arm extend the starter rope and secure the rope in the guide.
8
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Description
This video provides step-by-step instructions for replacing a recoil starter on Honda small engines. The most common reason for replacing a starter is if it is damaged or will not engage with the drive shaft.
All of the information in this recoil starter replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
All of the information in this recoil starter replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
Step-By-Step Instructions
1
Before you replace the recoil starter on your engine first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Release the starter rope from the guide and note the orientation of the starter.
4
Now use a 10mm socket to unthread the mounting nuts securing the starter.
5
Remove the old starter.
6
Install the new recoil starter by properly aligning it on the engine shroud then thread and tighten the mounting nuts to secure.
7
Depress the bail arm extend the starter rope and secure the rope in the guide.
8
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com