Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHonda Carburetor Float Bowl Gasket Replacement #16010-883-015
Honda Carburetor Float Bowl Gasket Replacement #16010-883-015
Skill Level
Total Parts Cost
$16.47Estimated Savings
$112.5004:26
- Description
This video provides step-by-step instructions for replacing a carburetor float bowl gasket on Honda small engines. The most common reason for replacing a gasket is if the carburetor is leaking fuel.
All of the information in this gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
All of the information in this gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
Step By Step Instructions
1
Before you replace the gaskets on the carburetor float bowl first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Detach the filter housing from the breather tube.
6
Next, release the retaining clamp and detach the fuel line from the carburetor.
7
Disconnect the throttle return spring and the governor rod to release the carburetor.
8
Use a 10mm wrench to unthread the screw securing the carburetor bowl.
9
Lift off the bowl and remove the old gasket.
10
Install the new bowl gasket by aligning it in the groove.
11
Remove the old gasket from the bowl screw and slide on the new gasket.
12
Replace the bowl then thread and tighten the screw to secure.
13
Reinstall the carburetor by first connecting the governor rod and throttle return spring to the throttle arm.
14
Attach the fuel line and secure with the clamp.
15
Next, attach the breather tube to the air filter housing.
16
Insert the mounting bolts through the housing.
17
Slide on the air cleaner gasket followed by the carburetor.
18
Now slide on the air guide gasket followed by the choke control assembly.
19
Slide on the intake gasket then thread the bolts into the engine and tighten to secure.
20
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
21
With the repair completed reattach the wire and boot to the spark plug open the fuel valve and your engine should be ready for use.
Description
This video provides step-by-step instructions for replacing a carburetor float bowl gasket on Honda small engines. The most common reason for replacing a gasket is if the carburetor is leaking fuel.
All of the information in this gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
All of the information in this gasket replacement video is applicable to the following brands: Honda
Tools used: 10mm socket
Step-By-Step Instructions
1
Before you replace the gaskets on the carburetor float bowl first make sure the engine has cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting and close the fuel valve.
3
Press the retaining tabs down to release the air housing cover and set the cover and air filter aside
4
Use a 10mm socket to unthread the mounting bolts securing the air filter housing and carburetor.
5
Detach the filter housing from the breather tube.
6
Next, release the retaining clamp and detach the fuel line from the carburetor.
7
Disconnect the throttle return spring and the governor rod to release the carburetor.
8
Use a 10mm wrench to unthread the screw securing the carburetor bowl.
9
Lift off the bowl and remove the old gasket.
10
Install the new bowl gasket by aligning it in the groove.
11
Remove the old gasket from the bowl screw and slide on the new gasket.
12
Replace the bowl then thread and tighten the screw to secure.
13
Reinstall the carburetor by first connecting the governor rod and throttle return spring to the throttle arm.
14
Attach the fuel line and secure with the clamp.
15
Next, attach the breather tube to the air filter housing.
16
Insert the mounting bolts through the housing.
17
Slide on the air cleaner gasket followed by the carburetor.
18
Now slide on the air guide gasket followed by the choke control assembly.
19
Slide on the intake gasket then thread the bolts into the engine and tighten to secure.
20
Replace the air filter in the housing then align the lower cover tabs with the housing and snap the upper tabs into place.
21
With the repair completed reattach the wire and boot to the spark plug open the fuel valve and your engine should be ready for use.
Applicable Product Model
Parts Needed
Carburetor Bowl Gasket
$16.47
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com