Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLennox Furnace Flame Sensor Replacement #69W43
Lennox Furnace Flame Sensor Replacement #69W43
Skill Level
Total Parts Cost
$128.79Estimated Savings
$112.5001:44
- Description
This video provides step-by-step repair instructions for replacing the flame sensor on a Lennox furnace. The most common reasons for replacing the flame sensor are when the furnace doesn’t heat or runs only for a few minutes.
All of the information in this flame sensor replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
All of the information in this flame sensor replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
Step By Step Instructions
1
Before you replace the flame sensor in your furnace first turn off the power to the furnace.
2
Unthread the retaining knobs securing the upper access panel and remove the panel.
3
Detach the flame sensor wire.
4
Now use a quarter inch socket or nut driver to unthread the mounting screw securing the sensor.
5
Slide out the old sensor.
6
Install the new flame sensor by carefully inserting it into the burner housing.
7
Thread and tighten the mounting screw to secure.
8
Connect the wire.
9
Replace the upper access panel by aligning the top edge first then thread the retaining knobs to secure.
10
With the repair completed turn the power back on and your furnace should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the flame sensor on a Lennox furnace. The most common reasons for replacing the flame sensor are when the furnace doesn’t heat or runs only for a few minutes.
All of the information in this flame sensor replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
All of the information in this flame sensor replacement video is applicable to the following brands: Lennox
Tools needed: 1/4 inch socket
Connect With Us!
Step-By-Step Instructions
1
Before you replace the flame sensor in your furnace first turn off the power to the furnace.
2
Unthread the retaining knobs securing the upper access panel and remove the panel.
3
Detach the flame sensor wire.
4
Now use a quarter inch socket or nut driver to unthread the mounting screw securing the sensor.
5
Slide out the old sensor.
6
Install the new flame sensor by carefully inserting it into the burner housing.
7
Thread and tighten the mounting screw to secure.
8
Connect the wire.
9
Replace the upper access panel by aligning the top edge first then thread the retaining knobs to secure.
10
With the repair completed turn the power back on and your furnace should be ready for use.
Applicable Product Model
Parts Needed
Flame Sensor
$128.79
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com