Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Oven Igniter Replacement #98005652
Whirlpool Gas Oven Igniter Replacement #98005652
Skill Level
Total Parts Cost
$44.23Estimated Savings
$112.5003:08
- Description
This video provides step-by-step repair instructions for replacing the oven igniter on a Whirlpool gas range. The most common reason for replacing the oven igniter is when the oven won’t turn on, won’t heat, or doesn’t bake evenly.
All of the information for this oven igniter replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, 5/16 socket or nut driver
All of the information for this oven igniter replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, 5/16 socket or nut driver
Step By Step Instructions
1
Before you replace the oven igniter in your range unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the lower rear access panel.
3
Remove the panel.
4
Disconnect the igniter wire connecter and free the wire.
5
Next, open the oven door and remove the racks.
6
Lift the lower access panel up from the rear and slide it back to remove.
7
Unthread the mounting screw securing the burner tube and pull the burner tube and igniter out of the oven.
8
Now use a 5/16th inch socket or nut driver to unthread the two mounting screws securing the igniter.
9
Remove the old igniter.
10
Install the new oven igniter by positioning it on the burner tube then replace the screws to secure.
11
Insert the igniter wire connecter through the hole in the rear of the oven and realign the burner tube.
12
Secure it with the screw.
13
Replace the lower access panel by inserting the front edge under the oven door frame then push the rear of the panel into place.
14
Reinstall the oven racks.
15
Connect the igniter wire connecter.
16
Reposition the lower rear access panel and secure it with the screws.
17
With the repair completed plug the power cord back in and your range should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the oven igniter on a Whirlpool gas range. The most common reason for replacing the oven igniter is when the oven won’t turn on, won’t heat, or doesn’t bake evenly.
All of the information for this oven igniter replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, 5/16 socket or nut driver
All of the information for this oven igniter replacement video is applicable to the following brands:
Kenmore, Frigidaire, Amana, Crosley, Estate, Magic Chef, Maytag, Roper
Tools needed: Phillips head screwdriver, 5/16 socket or nut driver
Step-By-Step Instructions
1
Before you replace the oven igniter in your range unplug the power cord.
2
Use a phillips-head screwdriver to unthread the screws securing the lower rear access panel.
3
Remove the panel.
4
Disconnect the igniter wire connecter and free the wire.
5
Next, open the oven door and remove the racks.
6
Lift the lower access panel up from the rear and slide it back to remove.
7
Unthread the mounting screw securing the burner tube and pull the burner tube and igniter out of the oven.
8
Now use a 5/16th inch socket or nut driver to unthread the two mounting screws securing the igniter.
9
Remove the old igniter.
10
Install the new oven igniter by positioning it on the burner tube then replace the screws to secure.
11
Insert the igniter wire connecter through the hole in the rear of the oven and realign the burner tube.
12
Secure it with the screw.
13
Replace the lower access panel by inserting the front edge under the oven door frame then push the rear of the panel into place.
14
Reinstall the oven racks.
15
Connect the igniter wire connecter.
16
Reposition the lower rear access panel and secure it with the screws.
17
With the repair completed plug the power cord back in and your range should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com