Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairDanby Dishwasher Replace Upper Spray Arm Support #673000900195
Danby Dishwasher Replace Upper Spray Arm Support #673000900195
Skill Level
Total Parts Cost
$4.77Estimated Savings
$112.5002:12
- Description
This video provides step-by-step repair instructions for replacing the upper spray arm support on a Danby dishwasher. The most common reason for replacing the support is if the upper spray arm will not spin properly, or if it is leaking.
All of the information for this dishwasher spray arm support replacement video is applicable to the following brands:
Danby
Tools needed: none
All of the information for this dishwasher spray arm support replacement video is applicable to the following brands:
Danby
Tools needed: none
Step By Step Instructions
1
To replace the upper wash arm support in your dishwasher we recommend fully removing the upper dish rack.
2
To do this release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
Next, detach the adapter from the rack.
5
Note where the old support is positioned then remove it.
6
Prepare the new upper wash arm support for installation by transferring the wash arm from the old support to the new one.
7
Position the new support on the rack.
8
Align the adapter on the rack and on the support then snap the adapter into place.
9
Realign the upper rack on the support rails.
10
Replace the front stop clips and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper spray arm support on a Danby dishwasher. The most common reason for replacing the support is if the upper spray arm will not spin properly, or if it is leaking.
All of the information for this dishwasher spray arm support replacement video is applicable to the following brands:
Danby
Tools needed: none
All of the information for this dishwasher spray arm support replacement video is applicable to the following brands:
Danby
Tools needed: none
Step-By-Step Instructions
1
To replace the upper wash arm support in your dishwasher we recommend fully removing the upper dish rack.
2
To do this release the retaining tabs to remove the front stop clips from the support rails.
3
Slide out the rack.
4
Next, detach the adapter from the rack.
5
Note where the old support is positioned then remove it.
6
Prepare the new upper wash arm support for installation by transferring the wash arm from the old support to the new one.
7
Position the new support on the rack.
8
Align the adapter on the rack and on the support then snap the adapter into place.
9
Realign the upper rack on the support rails.
10
Replace the front stop clips and your dishwasher should be ready for use.
Applicable Product Model
Parts Needed
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com