Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairDanby Dishwasher Upper Spray Arm Nut Gasket #673001700003
Danby Dishwasher Upper Spray Arm Nut Gasket #673001700003
Skill Level
Total Parts Cost
$29.86Estimated Savings
$112.5001:11
- Description
This video provides step-by-step repair instructions for replacing the upper spray arm nut gasket on a Danby dishwasher. The most common reason for replacing the gasket is if the upper spray arm is not spinning or spraying properly, due to too little water reaching the arm.
All of the information for this dishwasher spray arm nut gasket replacement video is applicable to the following brands:
Danby
Tools needed: small flat head screwdriver
All of the information for this dishwasher spray arm nut gasket replacement video is applicable to the following brands:
Danby
Tools needed: small flat head screwdriver
Step By Step Instructions
1
To replace the upper wash arm nut gasket in your dishwasher open the dishwasher door and pull the upper rack forward.
2
Rotate the nut counter-clockwise to release the wash arm.
3
You can now use a small flat-head screwdriver to help pry out the old gasket if still intact.
4
Install the new gasket by inserting it into the nut.
5
Realign the wash arm on the support and rotate the nut clockwise to secure.
6
Confirm that the arm spins freely and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the upper spray arm nut gasket on a Danby dishwasher. The most common reason for replacing the gasket is if the upper spray arm is not spinning or spraying properly, due to too little water reaching the arm.
All of the information for this dishwasher spray arm nut gasket replacement video is applicable to the following brands:
Danby
Tools needed: small flat head screwdriver
All of the information for this dishwasher spray arm nut gasket replacement video is applicable to the following brands:
Danby
Tools needed: small flat head screwdriver
Step-By-Step Instructions
1
To replace the upper wash arm nut gasket in your dishwasher open the dishwasher door and pull the upper rack forward.
2
Rotate the nut counter-clockwise to release the wash arm.
3
You can now use a small flat-head screwdriver to help pry out the old gasket if still intact.
4
Install the new gasket by inserting it into the nut.
5
Realign the wash arm on the support and rotate the nut clockwise to secure.
6
Confirm that the arm spins freely and your dishwasher should be ready for use.
Applicable Product Model
Recommended Tools and Accessories
Cleaner
$9.80
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com