Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top-Load Washer Replace Pump Outlet Hose #W10215091
Whirlpool Top-Load Washer Replace Pump Outlet Hose #W10215091
Skill Level
Total Parts Cost
$30.10Estimated Savings
$112.5003:17
- Description
This video provides step-by-step repair instructions for replacing the pump outlet hose on a Whirlpool washer. The most common reason for replacing the pump outlet hose is if it is leaking.
All of the information for this pump outlet hose replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, flat-head screwdriver, pliers
All of the information for this pump outlet hose replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, flat-head screwdriver, pliers
Step By Step Instructions
1
Before you replace the pump outlet hose in your washer be sure to unplug the power cord.
2
Use pliers to release the retaining clamp and detach the drain hose from the outlet hose mounting flange.
3
Use a quarter-inch socket or nut driver to unthread the screw securing the wiring harness and tube guard and remove the guard.
4
Next, unthread the screws securing the lower rear access panel.
5
Detach the panel.
6
Unthread the screw securing the outlet hose mounting flange.
7
Use a flat-head screwdriver to depress the mounting flange retaining tab to fully detach it from the panel.
8
Release the spring clamp securing the pump outlet hose to the pump and remove the old hose.
9
Prepare the new pump outlet hose for installation by sliding the spring clamp over the appropriate end.
10
Attach the new hose to the drain pump and secure it with the clamp.
11
Reposition the rear panel then snap the outlet hose mounting flange into place.
12
Thread the screw to secure.
13
Fully realign the access panel and rethread the screws to secure.
14
Reposition the wiring harness and tube guard and rethread the screw to secure.
15
Attach the drain hose to the new outlet hose and secure it with the clamp.
16
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the pump outlet hose on a Whirlpool washer. The most common reason for replacing the pump outlet hose is if it is leaking.
All of the information for this pump outlet hose replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, flat-head screwdriver, pliers
All of the information for this pump outlet hose replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: quarter-inch socket or nut driver, flat-head screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the pump outlet hose in your washer be sure to unplug the power cord.
2
Use pliers to release the retaining clamp and detach the drain hose from the outlet hose mounting flange.
3
Use a quarter-inch socket or nut driver to unthread the screw securing the wiring harness and tube guard and remove the guard.
4
Next, unthread the screws securing the lower rear access panel.
5
Detach the panel.
6
Unthread the screw securing the outlet hose mounting flange.
7
Use a flat-head screwdriver to depress the mounting flange retaining tab to fully detach it from the panel.
8
Release the spring clamp securing the pump outlet hose to the pump and remove the old hose.
9
Prepare the new pump outlet hose for installation by sliding the spring clamp over the appropriate end.
10
Attach the new hose to the drain pump and secure it with the clamp.
11
Reposition the rear panel then snap the outlet hose mounting flange into place.
12
Thread the screw to secure.
13
Fully realign the access panel and rethread the screws to secure.
14
Reposition the wiring harness and tube guard and rethread the screw to secure.
15
Attach the drain hose to the new outlet hose and secure it with the clamp.
16
With the repair completed plug the power cord back in and your washer should be ready for use.
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com