Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top-Load Washer Replace Selector Switch #W10285518
Whirlpool Top-Load Washer Replace Selector Switch #W10285518
Skill Level
Total Parts Cost
$76.94Estimated Savings
$112.5001:53
- Description
This video provides step-by-step repair instructions for replacing the five-position selector switch on a Whirlpool washer. The most common reason for replacing the selector switch is if the washer’s settings can’t be adjusted.
This selector switch replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
This selector switch replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
Step By Step Instructions
1
Before you replace a five-position selector switch in your washer be sure to unplug the power cord.
2
Insert a putty knife under the control panel to release the two spring clips securing the panel.
3
Pull the panel forward to release it.
4
Disconnect the wire connecter from the selector switch you’re replacing.
5
Remove the selector knob.
6
You can now lift up the locking arm and rotate the old switch to remove.
7
Install the new selector switch by inserting it into the control panel then rotate until the locking arm snaps into place.
8
Align the knob on the stem of the new switch and push it into place.
9
Connect the wire connecter.
10
Realign the control panel on the upper rear panel, making sure the tabs are inserted into the slots in the main top.
11
Push the control panel down to snap the spring clips into place.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the five-position selector switch on a Whirlpool washer. The most common reason for replacing the selector switch is if the washer’s settings can’t be adjusted.
This selector switch replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
This selector switch replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
Step-By-Step Instructions
1
Before you replace a five-position selector switch in your washer be sure to unplug the power cord.
2
Insert a putty knife under the control panel to release the two spring clips securing the panel.
3
Pull the panel forward to release it.
4
Disconnect the wire connecter from the selector switch you’re replacing.
5
Remove the selector knob.
6
You can now lift up the locking arm and rotate the old switch to remove.
7
Install the new selector switch by inserting it into the control panel then rotate until the locking arm snaps into place.
8
Align the knob on the stem of the new switch and push it into place.
9
Connect the wire connecter.
10
Realign the control panel on the upper rear panel, making sure the tabs are inserted into the slots in the main top.
11
Push the control panel down to snap the spring clips into place.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com