Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top Load Washer Leveling Leg Replacement #W10397994
Whirlpool Top Load Washer Leveling Leg Replacement #W10397994
Skill Level
Total Parts Cost
$22.41Estimated Savings
$112.5001:29
- Description
This video provides step-by-step repair instructions for replacing the leveling leg on a Whirlpool washer. The most common reason for replacing the leveling leg is if the washer is shaking or vibrating during operation.
This leveling leg replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
This leveling leg replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
Step By Step Instructions
1
To replace a leveling leg on your washer lift the washer up and support it with a wood block or a comparable sturdy object.
2
Now use channel-lock pliers to help unthread the old leg from the base.
3
Install the new leveling leg by threading it into the base until the foot is flush against it.
4
Remove the support.
5
Determine if your washer is level.
6
If it isn’t support the washer and adjust the leg.
7
Repeat this procedure until you can confirm that the washer is level and ready for use.
Description
This video provides step-by-step repair instructions for replacing the leveling leg on a Whirlpool washer. The most common reason for replacing the leveling leg is if the washer is shaking or vibrating during operation.
This leveling leg replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
This leveling leg replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: putty knife
Step-By-Step Instructions
1
To replace a leveling leg on your washer lift the washer up and support it with a wood block or a comparable sturdy object.
2
Now use channel-lock pliers to help unthread the old leg from the base.
3
Install the new leveling leg by threading it into the base until the foot is flush against it.
4
Remove the support.
5
Determine if your washer is level.
6
If it isn’t support the washer and adjust the leg.
7
Repeat this procedure until you can confirm that the washer is level and ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com