Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Top Load Washer Replace Shift Actuator #W10597177
Whirlpool Top Load Washer Replace Shift Actuator #W10597177
Skill Level
Total Parts Cost
$51.61Estimated Savings
$112.5002:58
- Description
This video provides step-by-step repair instructions for replacing the shift actuator on a Whirlpool washer. The most common reason for replacing the shift actuator is if the washer isn’t cycling properly.
This shift actuator replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: 5/16th inch socket or nut driver, Phillips-head screwdriver
This shift actuator replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: 5/16th inch socket or nut driver, Phillips-head screwdriver
Step By Step Instructions
1
Before you replace the shift actuator in your washer be sure to unplug the power cord
2
Shut off the water supply.
3
Remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Release the retaining clamp and detach the drain hose from the outlet hose mounting flange.
5
Now use tape to secure the washer lid.
6
Carefully tip the washer back so it rests on its rear panel.
7
Use a 5/16th inch socket or nut driver to unthread the screws securing the belt guard.
8
Detach the guard and disconnect the wire connecter from the shift actuator.
9
Using a phillips-head screwdriver, Unthread the mounting screws to release the old actuator.
10
Install the new shift actuator by aligning it on the gear case, making sure the arm is inserted into the shift lever.
11
Thread the mounting screws to secure.
12
Connect the wire connecter.
13
Reposition the belt guard and secure it with the screws.
14
Return the appliance to its upright position and remove the tape securing the lid.
15
Attach the drain hose to the outlet hose and secure it with the clamp.
16
Attach the hot and cold water supply lines.
17
With the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the shift actuator on a Whirlpool washer. The most common reason for replacing the shift actuator is if the washer isn’t cycling properly.
This shift actuator replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: 5/16th inch socket or nut driver, Phillips-head screwdriver
This shift actuator replacement video is applicable to the following brands:
Whirlpool, Amana, Crosley, Inglis, Kenmore, Maytag, Roper
Tools needed: 5/16th inch socket or nut driver, Phillips-head screwdriver
Step-By-Step Instructions
1
Before you replace the shift actuator in your washer be sure to unplug the power cord
2
Shut off the water supply.
3
Remove the hot and cold water supply lines from the inlet valve – be prepared for some water to spill out.
4
Release the retaining clamp and detach the drain hose from the outlet hose mounting flange.
5
Now use tape to secure the washer lid.
6
Carefully tip the washer back so it rests on its rear panel.
7
Use a 5/16th inch socket or nut driver to unthread the screws securing the belt guard.
8
Detach the guard and disconnect the wire connecter from the shift actuator.
9
Using a phillips-head screwdriver, Unthread the mounting screws to release the old actuator.
10
Install the new shift actuator by aligning it on the gear case, making sure the arm is inserted into the shift lever.
11
Thread the mounting screws to secure.
12
Connect the wire connecter.
13
Reposition the belt guard and secure it with the screws.
14
Return the appliance to its upright position and remove the tape securing the lid.
15
Attach the drain hose to the outlet hose and secure it with the clamp.
16
Attach the hot and cold water supply lines.
17
With the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com