Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Dryer Lint Filter Housing #WPW10219012
Whirlpool Electric Dryer Lint Filter Housing #WPW10219012
Skill Level
Total Parts Cost
$190.39Estimated Savings
$112.5004:57
- Description
This video provides step-by-step repair instructions for replacing the lint filter housing (or lint filter cover) on a Whirlpool electric dryer model #WED72HEDW0. The most common reason for replacing the filter housing is if it is damaged.
This lint filter housing replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
This lint filter housing replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Before you replace the lint filter housing in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Use a quarter-inch socket or nut driver to unthread the control panel housing mounting screws.
5
Disconnect the control panel wire connecter from the main control board.
6
Lift up the tabs to detach the housing.
7
Disconnect the door switch wire connecter.
8
Now lift up the front of the dryer and support it then use the quarter-inch socket or nut driver to remove the four lower mounting screws securing the front panel.
9
Remove the support and lower the appliance.
10
Open the dryer door and use a phillips-head screwdriver to unthread the screws securing the front panel to the bulkhead.
11
Using the quarter-inch socket or nut driver, unthread the upper mounting screws.
12
You can now lift the front panel up to detach it from the cabinet.
13
Disconnect the sensor wire connecter and remove the lint filter.
14
Using the quarter-inch socket or nut driver, unthread the three screws securing the lint filter housing.
15
Remove the old housing.
16
Install the new lint filter housing by positioning it on the front bulkhead then thread the screws to secure.
17
Reconnect the sensor wire connecter and replace the lint filter.
18
Reinstall the front panel by first feeding the door switch wire harness under the support brace then align the panel on the cabinet tabs.
19
Rethread the upper mounting screws.
20
Support the front of the dryer to replace the lower screws.
21
Secure the two screws behind the door as well.
22
Connect the door switch wire connecter.
23
Insert the control panel housing tabs into the slots in the front panel and snap the housing into place.
24
Rethread the mounting screws.
25
Connect the wire connecter to the main control board.
26
Realign the top panel and slide it into position.
27
Secure the screws.
28
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the lint filter housing (or lint filter cover) on a Whirlpool electric dryer model #WED72HEDW0. The most common reason for replacing the filter housing is if it is damaged.
This lint filter housing replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
This lint filter housing replacement video is applicable to the following brands:
Whirlpool, Maytag
Tools needed: 5/16th inch socket or nut driver, quarter-inch socket or nut driver
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the lint filter housing in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Use a quarter-inch socket or nut driver to unthread the control panel housing mounting screws.
5
Disconnect the control panel wire connecter from the main control board.
6
Lift up the tabs to detach the housing.
7
Disconnect the door switch wire connecter.
8
Now lift up the front of the dryer and support it then use the quarter-inch socket or nut driver to remove the four lower mounting screws securing the front panel.
9
Remove the support and lower the appliance.
10
Open the dryer door and use a phillips-head screwdriver to unthread the screws securing the front panel to the bulkhead.
11
Using the quarter-inch socket or nut driver, unthread the upper mounting screws.
12
You can now lift the front panel up to detach it from the cabinet.
13
Disconnect the sensor wire connecter and remove the lint filter.
14
Using the quarter-inch socket or nut driver, unthread the three screws securing the lint filter housing.
15
Remove the old housing.
16
Install the new lint filter housing by positioning it on the front bulkhead then thread the screws to secure.
17
Reconnect the sensor wire connecter and replace the lint filter.
18
Reinstall the front panel by first feeding the door switch wire harness under the support brace then align the panel on the cabinet tabs.
19
Rethread the upper mounting screws.
20
Support the front of the dryer to replace the lower screws.
21
Secure the two screws behind the door as well.
22
Connect the door switch wire connecter.
23
Insert the control panel housing tabs into the slots in the front panel and snap the housing into place.
24
Rethread the mounting screws.
25
Connect the wire connecter to the main control board.
26
Realign the top panel and slide it into position.
27
Secure the screws.
28
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Lint Filter Cover
$190.39
Total$0.00
Related Articles & Videos
06:16
Part Replacement
Whirlpool Alpha Electric Dryer Lint Filter Housing Replacement #W10906551
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com