Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Electric Dryer Main Control Board #WPW10654005
Whirlpool Electric Dryer Main Control Board #WPW10654005
Skill Level
Total Parts Cost
$250.52Estimated Savings
$112.5002:28
- Description
This video provides step-by-step repair instructions for replacing the main control board on a Whirlpool electric dryer. The most common reason for replacing the control board is if the washer won’t start.
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Before you replace the main control board in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Note the location of the wire connecters connected to the main control board then disconnect them.
5
Unthread the mounting screw securing the board.
6
Now insert a putty knife under the board and slide it forward to release the locking tab to detach the old board from the support bracket.
7
Install the new main control board by aligning it on the support bracket then slide it back to lock it into place.
8
Secure the board with the mounting screw.
9
Connect the wire connecters to the appropriate terminals on the new board.
10
Realign the top panel and slide it into position.
11
Secure the screws.
12
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the main control board on a Whirlpool electric dryer. The most common reason for replacing the control board is if the washer won’t start.
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
This control board replacement video is applicable to the following brands:
Whirlpool
Tools needed: 5/16th inch socket or nut driver, putty knife
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Before you replace the main control board in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the rear screws securing the top panel.
3
Slide the top panel back and lift up to detach.
4
Note the location of the wire connecters connected to the main control board then disconnect them.
5
Unthread the mounting screw securing the board.
6
Now insert a putty knife under the board and slide it forward to release the locking tab to detach the old board from the support bracket.
7
Install the new main control board by aligning it on the support bracket then slide it back to lock it into place.
8
Secure the board with the mounting screw.
9
Connect the wire connecters to the appropriate terminals on the new board.
10
Realign the top panel and slide it into position.
11
Secure the screws.
12
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Control Board
$250.52
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com