Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHusqvarna String Trimmer Replace Fuel Line Connector 530023877
Husqvarna String Trimmer Replace Fuel Line Connector 530023877
Skill Level
Total Parts Cost
$5.13Estimated Savings
$112.5004:27
- Description
This video provides step-by-step instructions for replacing the fuel line connector on a Husqvarna string trimmer. The most common reason for replacing the connector is if the string trimmer will not start or is leaking gas.
All of the information in this fuel line connector replacement video is applicable to the following brands: Poulan, Husqvarna, Craftsman, Poulan Pro
Tools used: 8 mm socket
All of the information in this fuel line connector replacement video is applicable to the following brands: Poulan, Husqvarna, Craftsman, Poulan Pro
Tools used: 8 mm socket
Step By Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace a fuel line connecter on your string trimmer…
6
…make sure the engine has cooled and there is no fuel in the tank.
7
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
8
Loosen the knob to release the air filter cover.
9
Remove the filter.
10
Use an 8mm socket or nut driver to unthread the air filter housing mounting nuts.
11
Lift up the choke lever and remove the housing.
12
Detach the throttle cable from the carburetor.
13
Note the orientation of the fuel lines then detach them from the carburetor and set the carburetor aside.
14
If still in place, remove the fuel cap and retainer.
15
If you’re replacing the fuel line connecter on the line with the filter, use a wire with a hook to pull out the fuel filter.
16
Now cut the line as close to the tank as possible…
17
…and push the line through the tank to remove it.
18
Detach the old connecter.
19
Before you install the new fuel line connecter…
20
…you will need to purchase and prepare a new section of fuel line.
21
Cut the end of the new line at an angle.
22
Now feed the line through the hole in the tank until you can pull it out through the fill spout.
23
Cut off the angled portion of the line.
24
Now attach the new connecter.
25
Attach the existing section of line with the fuel filter to the new connecter.
26
Pull the new line through the tank until the connecter reaches the hole.
27
Make sure the filter is resting inside the tank.
28
Trim the new line to approximately two inches.
29
Insert the fuel cap retainer and thread on the cap.
30
Attach the fuel lines to the appropriate carburetor ports.
31
Attach the z-end of the throttle cable to the carburetor.
32
Align the carburetor on the mounting posts…confirm the cable mount is properly positioned…then push the carburetor into place.
33
With the choke lever up, realign the air filter housing…
34
…and secure it with the nuts.
35
Open the choke and replace the air filter.
36
Reposition the air filter cover and tighten the knob to secure.
37
With the repair completed…
38
…reattach the wire and boot to the spark plug…refill the fuel tank…
39
…and your string trimmer should be ready for use.
40
At repairclinic – we make fixing things easy.
41
Thank you for supporting the production of these videos by purchasing your parts from our website.
Description
This video provides step-by-step instructions for replacing the fuel line connector on a Husqvarna string trimmer. The most common reason for replacing the connector is if the string trimmer will not start or is leaking gas.
All of the information in this fuel line connector replacement video is applicable to the following brands: Poulan, Husqvarna, Craftsman, Poulan Pro
Tools used: 8 mm socket
All of the information in this fuel line connector replacement video is applicable to the following brands: Poulan, Husqvarna, Craftsman, Poulan Pro
Tools used: 8 mm socket
Step-By-Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace a fuel line connecter on your string trimmer…
6
…make sure the engine has cooled and there is no fuel in the tank.
7
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
8
Loosen the knob to release the air filter cover.
9
Remove the filter.
10
Use an 8mm socket or nut driver to unthread the air filter housing mounting nuts.
11
Lift up the choke lever and remove the housing.
12
Detach the throttle cable from the carburetor.
13
Note the orientation of the fuel lines then detach them from the carburetor and set the carburetor aside.
14
If still in place, remove the fuel cap and retainer.
15
If you’re replacing the fuel line connecter on the line with the filter, use a wire with a hook to pull out the fuel filter.
16
Now cut the line as close to the tank as possible…
17
…and push the line through the tank to remove it.
18
Detach the old connecter.
19
Before you install the new fuel line connecter…
20
…you will need to purchase and prepare a new section of fuel line.
21
Cut the end of the new line at an angle.
22
Now feed the line through the hole in the tank until you can pull it out through the fill spout.
23
Cut off the angled portion of the line.
24
Now attach the new connecter.
25
Attach the existing section of line with the fuel filter to the new connecter.
26
Pull the new line through the tank until the connecter reaches the hole.
27
Make sure the filter is resting inside the tank.
28
Trim the new line to approximately two inches.
29
Insert the fuel cap retainer and thread on the cap.
30
Attach the fuel lines to the appropriate carburetor ports.
31
Attach the z-end of the throttle cable to the carburetor.
32
Align the carburetor on the mounting posts…confirm the cable mount is properly positioned…then push the carburetor into place.
33
With the choke lever up, realign the air filter housing…
34
…and secure it with the nuts.
35
Open the choke and replace the air filter.
36
Reposition the air filter cover and tighten the knob to secure.
37
With the repair completed…
38
…reattach the wire and boot to the spark plug…refill the fuel tank…
39
…and your string trimmer should be ready for use.
40
At repairclinic – we make fixing things easy.
41
Thank you for supporting the production of these videos by purchasing your parts from our website.
Applicable Product Model
Parts Needed
Hose Connector
$5.13
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com