DescriptionThis video provides step-by-step instructions for replacing the choke lever on a Husqvarna string trimmer. The most common reason for replacing the lever is if it is damaged.
All of the information in this choke lever replacement video is applicable to the following brands: Poulan, Husqvarna, Craftsman, Poulan Pro
Tools used: flat head screwdriver, 8mm socket
Step-By-Step Instructions1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the choke lever on your string trimmer…
6
…make sure the engine has cooled.
7
Next, remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
8
Loosen the knob to release the air filter cover.
10
Use an 8mm socket or nut driver to unthread the air filter housing mounting nuts.
11
Lift up the choke lever and remove the housing.
12
Open the choke…note the orientation of the choke lever…then use a flat-head screwdriver to help pry the old lever off.
13
Install the new choke lever…
14
…by aligning it on the shaft and pushing it into place.
15
Close the choke…realign the air filter housing…
16
…and secure it with the nuts.
17
Open the choke and replace the air filter.
18
Reposition the air filter cover and tighten the knob to secure.
19
With the repair completed, reattach the wire and boot to the spark plug…
20
…and your string trimmer should be ready for use.
21
At repairclinic – we make fixing things easy.
22
Thank you for supporting the production of these videos by purchasing your parts from our website.