Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMaytag Dryer Cycling Thermostat Replacement #WP503979
Maytag Dryer Cycling Thermostat Replacement #WP503979
Skill Level
Total Parts Cost
$79.94Estimated Savings
$112.5002:25
- Description
This video provides step-by-step instructions for replacing the cycling thermostat on Maytag dryers. The most common reason for replacing the thermostat is the dryer taking to long to dry.
All of the information in this cycling thermostat replacement video is applicable to the following brands: Maytag
Tools used: 5/16" nut driver
All of the information in this cycling thermostat replacement video is applicable to the following brands: Maytag
Tools used: 5/16" nut driver
Step By Step Instructions
1
Before you replace the cycling thermostat in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the screws securing the lower access panel.
3
Detach the panel.
4
Note the orientation of the wires connected to the thermostat then disconnect them.
5
Unthread the mounting screws to release the old thermostat.
6
Install the new cycling thermostat by first aligning it on the heater then position both on the blower housing.
7
Thread the mounting screws to secure both components.
8
Connect the wires to the appropriate terminals.
9
Realign the lower access panel and secure it with the screws.
10
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the cycling thermostat on Maytag dryers. The most common reason for replacing the thermostat is the dryer taking to long to dry.
All of the information in this cycling thermostat replacement video is applicable to the following brands: Maytag
Tools used: 5/16" nut driver
All of the information in this cycling thermostat replacement video is applicable to the following brands: Maytag
Tools used: 5/16" nut driver
Step-By-Step Instructions
1
Before you replace the cycling thermostat in your dryer be sure to unplug the power cord.
2
Use a 5/16th inch socket or nut driver to unthread the screws securing the lower access panel.
3
Detach the panel.
4
Note the orientation of the wires connected to the thermostat then disconnect them.
5
Unthread the mounting screws to release the old thermostat.
6
Install the new cycling thermostat by first aligning it on the heater then position both on the blower housing.
7
Thread the mounting screws to secure both components.
8
Connect the wires to the appropriate terminals.
9
Realign the lower access panel and secure it with the screws.
10
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Parts Needed
Cycling Thermostat
$79.94
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com