Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairMaytag Dryer Drum Glide Replacement #WP37001298
Maytag Dryer Drum Glide Replacement #WP37001298
Skill Level
Total Parts Cost
$10.75Estimated Savings
$112.5004:22
- Description
This video provides step-by-step instructions for replacing the drum glide on Maytag dryers. The most common reasons for replacing the glide are when the dryer makes noise, stops turning mid-cycle, or won’t turn at all.
All of the information in this drum glide replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver
All of the information in this drum glide replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver
Step By Step Instructions
1
Before you replace the drum glide in your dryer
2
Use a 5/16th inch socket or nut driver to unthread the screws securing the lower access panel.
3
Detach the panel.
4
Next, unthread the screws securing the bottom of the front panel.
5
Pull the panel out from the bottom to detach.
6
Note the orientation of the door switch wires then disconnect them and set the panel aside.
7
Unthread the main top mounting screws.
8
Lift the main top up and support it.
9
Disconnect the light assembly wires and remove them from the retainer.
10
Unthread the front bulkhead mounting screws.
11
Lift the bulkhead up to detach it from the cabinet.
12
If still intact, remove the old glide.
13
Before you install the new drum glide confirm that the glide pad is intact on the support bracket.
14
Insert the "T"-end of the glide into the larger hole in the bracket and the opposite end into the smaller hole.
15
For optimum operation, we recommend replacing both drum glides at the same time.
16
Replace the front bulkhead by aligning the drum then insert the tabs into the slots in the cabinet.
17
Rethread the mounting screws.
18
Feed the light assembly wires through the retainer and reconnect them.
19
Remove the support and lower the main top.
20
Secure it with the screws.
21
Replace the front panel by first reconnecting the door switch wires to the appropriate terminals.
22
Now hook the retaining clips under the main top fully reposition the panel and rethread the screws at the bottom.
23
Realign the lower access panel and secure it with the screws.
24
With the repair completed plug the power cord back in and your dryer should be ready for use.
Description
This video provides step-by-step instructions for replacing the drum glide on Maytag dryers. The most common reasons for replacing the glide are when the dryer makes noise, stops turning mid-cycle, or won’t turn at all.
All of the information in this drum glide replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver
All of the information in this drum glide replacement video is applicable to the following brands: Maytag
Tools used: 5/16 inch nut driver
Step-By-Step Instructions
1
Before you replace the drum glide in your dryer
2
Use a 5/16th inch socket or nut driver to unthread the screws securing the lower access panel.
3
Detach the panel.
4
Next, unthread the screws securing the bottom of the front panel.
5
Pull the panel out from the bottom to detach.
6
Note the orientation of the door switch wires then disconnect them and set the panel aside.
7
Unthread the main top mounting screws.
8
Lift the main top up and support it.
9
Disconnect the light assembly wires and remove them from the retainer.
10
Unthread the front bulkhead mounting screws.
11
Lift the bulkhead up to detach it from the cabinet.
12
If still intact, remove the old glide.
13
Before you install the new drum glide confirm that the glide pad is intact on the support bracket.
14
Insert the "T"-end of the glide into the larger hole in the bracket and the opposite end into the smaller hole.
15
For optimum operation, we recommend replacing both drum glides at the same time.
16
Replace the front bulkhead by aligning the drum then insert the tabs into the slots in the cabinet.
17
Rethread the mounting screws.
18
Feed the light assembly wires through the retainer and reconnect them.
19
Remove the support and lower the main top.
20
Secure it with the screws.
21
Replace the front panel by first reconnecting the door switch wires to the appropriate terminals.
22
Now hook the retaining clips under the main top fully reposition the panel and rethread the screws at the bottom.
23
Realign the lower access panel and secure it with the screws.
24
With the repair completed plug the power cord back in and your dryer should be ready for use.
Applicable Product Model
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com