Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Replace Dispenser Lever #241682002

Frigidaire Refrigerator Replace Dispenser Lever #241682002

02:34
This video provides step-by-step instructions for replacing the dispenser lever on Frigidaire refrigerators and freezers. The most common reason for replacing the dispenser lever is when depressing the water dispenser lever causes little or no water to flow.

All the information in this dispenser lever replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Crosley

Tools used: screwdriver

Step By Step Instructions

1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to pull off the drip tray and remove the dispenser cover screws.
3
Next, lift the cover up and off then disconnect the wire harness.
4
Remove the screws securing the dispenser control module.
5
Pull the water supply tube out and pull the module away from the door.
6
Remove the dispenser lever screws and retaining brackets.
7
Then lift out the old lever.
8
Install the new dispenser lever by inserting it in the control module making sure the spring is correctly positioned in the notch on the lever.
9
Replace the retaining brackets and screws.
10
Reposition the dispenser control module making sure the water supply tube is in place.
11
Reinstall the screws.
12
Reconnect the wire harness and slide the dispenser cover down into position.
13
Secure it with the screws.
14
Snap the drip tray into place.
15
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the dispenser lever on Frigidaire refrigerators and freezers. The most common reason for replacing the dispenser lever is when depressing the water dispenser lever causes little or no water to flow.

All the information in this dispenser lever replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Crosley

Tools used: screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to pull off the drip tray and remove the dispenser cover screws.
3
Next, lift the cover up and off then disconnect the wire harness.
4
Remove the screws securing the dispenser control module.
5
Pull the water supply tube out and pull the module away from the door.
6
Remove the dispenser lever screws and retaining brackets.
7
Then lift out the old lever.
8
Install the new dispenser lever by inserting it in the control module making sure the spring is correctly positioned in the notch on the lever.
9
Replace the retaining brackets and screws.
10
Reposition the dispenser control module making sure the water supply tube is in place.
11
Reinstall the screws.
12
Reconnect the wire harness and slide the dispenser cover down into position.
13
Secure it with the screws.
14
Snap the drip tray into place.
15
You’re now ready to plug the appliance back in to make sure it’s functioning properly.

Applicable Product Model

icons/refrigerator
Brand
Product Type
Model
Subtype
Cooling System
Icemaking System
Dispensing System
Product Diagram & Manuals
Parts Needed
Total$0.00

Related Articles & Videos

01:27
Disassembly
Frigidaire Refrigerator Interior Panel Disassembly
01:56
Disassembly
Frigidaire Refrigerator Dispenser Disassembly
02:26
Part Replacement
Frigidaire Refrigerator Dispenser Water Inlet Valve #242252702
03:16
Part Replacement
Frigidaire Refrigerator Replace Defrost Heater #242044113
02:37
Part Replacement
Frigidaire Refrigerator Defrost Thermostat Replacement #5303918214