Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Right Rack Adjuster Housing #WPW10588165
KitchenAid Dishwasher Right Rack Adjuster Housing #WPW10588165
Skill Level
Total Parts Cost
$50.56Estimated Savings
$112.5001:11
- Description
This video provides step-by-step repair instructions for replacing the right rack adjuster housing on a KitchenAid dishwasher. The most common reason for replacing the housing is if the upper rack will not adjust properly.
All of the information for this housing replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
All of the information for this housing replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
Step By Step Instructions
1
To replace the right adjuster housing on the upper dish rack, pull the upper rack out and use a small flat-head screwdriver to depress the tabs to release the adjuster housing cover.
2
You can now remove the old housing and install the new adjuster housing by aligning the locking lever in the adjuster slot, then snap the cover on to secure.
Description
This video provides step-by-step repair instructions for replacing the right rack adjuster housing on a KitchenAid dishwasher. The most common reason for replacing the housing is if the upper rack will not adjust properly.
All of the information for this housing replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
All of the information for this housing replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
Step-By-Step Instructions
1
To replace the right adjuster housing on the upper dish rack, pull the upper rack out and use a small flat-head screwdriver to depress the tabs to release the adjuster housing cover.
2
You can now remove the old housing and install the new adjuster housing by aligning the locking lever in the adjuster slot, then snap the cover on to secure.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com