Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Pro Scrub Manifold Replacement W10767752
KitchenAid Dishwasher Pro Scrub Manifold Replacement W10767752
Skill Level
Total Parts Cost
$101.52Estimated Savings
$112.5001:58
- Description
This video provides step-by-step repair instructions for replacing the Pro Scrub manifold on a KitchenAid dishwasher. The most common reason for replacing the manifold if the dishes are not cleaning properly.
All of the information for this manifold replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
All of the information for this manifold replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
Step By Step Instructions
1
For better access to replace the ProScrub manifold in your dishwasher pull the upper rack out and use a small flat-head screwdriver to depress the retaining tabs securing the rack adjusters to the tracks.
2
Fully remove the upper rack.
3
Now pull out the lower dish rack and rotate the lower wash arm assembly counter-clockwise to detach it from the support.
4
Use the small flat-head screwdriver to help detach the pro-scrub manifold from the supply tube and support.
5
Install the new pro-scrub manifold by first inserting the port into the washer arm support then snap the manifold body onto the water supply tube.
6
Align the tabs in the lower wash arm with the support so when you rotate the wash arm assembly clockwise, the assembly locks into place.
7
Push the lower dish rack back in and, if applicable, replace the upper dish rack by first inserting the rear tabs into the appropriate slots in the track then snap the front tabs into place.
Description
This video provides step-by-step repair instructions for replacing the Pro Scrub manifold on a KitchenAid dishwasher. The most common reason for replacing the manifold if the dishes are not cleaning properly.
All of the information for this manifold replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
All of the information for this manifold replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
Step-By-Step Instructions
1
For better access to replace the ProScrub manifold in your dishwasher pull the upper rack out and use a small flat-head screwdriver to depress the retaining tabs securing the rack adjusters to the tracks.
2
Fully remove the upper rack.
3
Now pull out the lower dish rack and rotate the lower wash arm assembly counter-clockwise to detach it from the support.
4
Use the small flat-head screwdriver to help detach the pro-scrub manifold from the supply tube and support.
5
Install the new pro-scrub manifold by first inserting the port into the washer arm support then snap the manifold body onto the water supply tube.
6
Align the tabs in the lower wash arm with the support so when you rotate the wash arm assembly clockwise, the assembly locks into place.
7
Push the lower dish rack back in and, if applicable, replace the upper dish rack by first inserting the rear tabs into the appropriate slots in the track then snap the front tabs into place.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com