Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Door Handle Replacement #W10708004
KitchenAid Dishwasher Door Handle Replacement #W10708004
Skill Level
Total Parts Cost
$55.29Estimated Savings
$112.5004:05
- Description
This video provides step-by-step repair instructions for replacing the door handle on a KitchenAid dishwasher. The most common reason for replacing the handle is if it is damage or loose.
All of the information for this door handle replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 5/16" nut driver, 1/8" hex key, T-15 Torx bit
All of the information for this door handle replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 5/16" nut driver, 1/8" hex key, T-15 Torx bit
Step By Step Instructions
1
To replace the dishwasher door handle use the provided 1/8th inch hex key to unthread the set screws securing the old handle to the mounting studs.
2
Remove the old handle. If you need to replace one or both of the mounting studs as well
3
Turn off the power to the appliance then open the dishwasher door and use a t-15 torx bit to unthread all of the screws holding the inner and outer door panels together.
4
Separate the panels and release the door latch, disconnect the wire connecter and detach the retainer. to fully remove the outer panel.
5
Use pliers to secure the studs and a 5/16th inch socket or nut driver to unthread the screws securing the studs. You’re now ready to install the new door handle and mounting studs.
6
Align the studs vertically on the outer door panel then thread and tighten the screws to secure.
7
Position the door handle on the mounting studs and use the hex key to tighten the set screws.
8
Reinstall the outer door panel by first positioning the door latch.
9
Connect the wire connecter and secure the retainer.
10
Set the outer door panel on the hinges.
11
Confirm the inner door panel trim is in place then join the two panels together and rethread all of the screws to secure.
12
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door handle on a KitchenAid dishwasher. The most common reason for replacing the handle is if it is damage or loose.
All of the information for this door handle replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 5/16" nut driver, 1/8" hex key, T-15 Torx bit
All of the information for this door handle replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 5/16" nut driver, 1/8" hex key, T-15 Torx bit
Step-By-Step Instructions
1
To replace the dishwasher door handle use the provided 1/8th inch hex key to unthread the set screws securing the old handle to the mounting studs.
2
Remove the old handle. If you need to replace one or both of the mounting studs as well
3
Turn off the power to the appliance then open the dishwasher door and use a t-15 torx bit to unthread all of the screws holding the inner and outer door panels together.
4
Separate the panels and release the door latch, disconnect the wire connecter and detach the retainer. to fully remove the outer panel.
5
Use pliers to secure the studs and a 5/16th inch socket or nut driver to unthread the screws securing the studs. You’re now ready to install the new door handle and mounting studs.
6
Align the studs vertically on the outer door panel then thread and tighten the screws to secure.
7
Position the door handle on the mounting studs and use the hex key to tighten the set screws.
8
Reinstall the outer door panel by first positioning the door latch.
9
Connect the wire connecter and secure the retainer.
10
Set the outer door panel on the hinges.
11
Confirm the inner door panel trim is in place then join the two panels together and rethread all of the screws to secure.
12
With the repair completed turn the power back on and your dishwasher should be ready for use.
Applicable Product Model
Parts Needed
Door Handle
$55.29
Recommended Tools and Accessories
Handle End Cap
$31.26
Handle End Cap
$31.26
Handle End Cap
$16.34
Stud
$11.33
Cleaner
$9.80
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com