Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Pump Outlet Cover Replacement #W10715847
KitchenAid Dishwasher Pump Outlet Cover Replacement #W10715847
Skill Level
Total Parts Cost
$27.14Estimated Savings
$112.5003:40
- Description
This video provides step-by-step repair instructions for replacing the pump outlet cover on a KitchenAid dishwasher. The most common reason for replacing the cover is debris entering and clogging the pump.
All of the information for this cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
All of the information for this cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
Step By Step Instructions
1
Before you replace the pump outlet cover in your dishwasher be sure to turn off the power to the appliance.
2
Pull the upper rack out and use a small flat-head screwdriver to depress the retaining tabs securing the rack adjusters to the tracks.
3
Fully remove the upper rack.
4
Next, release the rack stops securing the upper tray and slide the tray out.
5
Pull out the lower dish rack and rotate the lower wash arm assembly counter-clockwise to detach it from the support.
6
Now use the screwdriver to help detach the pro-scrub manifold from the supply tube and support.
7
Detach the water supply tube from the top and rear of the tub.
8
Lift up the coupler and release the tabs to detach the supply tube from the support.
9
Now lift up the retaining tab and rotate the old pump outlet cover counter-clockwise to detach.
10
Install the new pump outlet cover by positioning it on the motor shaft then rotate clockwise to lock it into place.
11
Reinstall the water supply tube assembly be inserting the port into the support; secure the coupler as well.
12
Snap the supply tube into place on the rear and top of the tub.
13
Reinstall the pro-scrub manifold by first inserting the port into the washer arm support then snap the manifold body onto the water supply tube.
14
Align the tabs in the lower wash arm with the support so when you rotate the wash arm assembly clockwise, the assembly locks into place.
15
Push the lower dish rack back in.
16
Reposition the upper tray on the tracks and snap the rack stops into place.
17
Replace the upper rack by first inserting the rear tabs into the appropriate slots in the track then snap the front tabs into place.
18
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the pump outlet cover on a KitchenAid dishwasher. The most common reason for replacing the cover is debris entering and clogging the pump.
All of the information for this cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
All of the information for this cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: flat head screwdriver
Step-By-Step Instructions
1
Before you replace the pump outlet cover in your dishwasher be sure to turn off the power to the appliance.
2
Pull the upper rack out and use a small flat-head screwdriver to depress the retaining tabs securing the rack adjusters to the tracks.
3
Fully remove the upper rack.
4
Next, release the rack stops securing the upper tray and slide the tray out.
5
Pull out the lower dish rack and rotate the lower wash arm assembly counter-clockwise to detach it from the support.
6
Now use the screwdriver to help detach the pro-scrub manifold from the supply tube and support.
7
Detach the water supply tube from the top and rear of the tub.
8
Lift up the coupler and release the tabs to detach the supply tube from the support.
9
Now lift up the retaining tab and rotate the old pump outlet cover counter-clockwise to detach.
10
Install the new pump outlet cover by positioning it on the motor shaft then rotate clockwise to lock it into place.
11
Reinstall the water supply tube assembly be inserting the port into the support; secure the coupler as well.
12
Snap the supply tube into place on the rear and top of the tub.
13
Reinstall the pro-scrub manifold by first inserting the port into the washer arm support then snap the manifold body onto the water supply tube.
14
Align the tabs in the lower wash arm with the support so when you rotate the wash arm assembly clockwise, the assembly locks into place.
15
Push the lower dish rack back in.
16
Reposition the upper tray on the tracks and snap the rack stops into place.
17
Replace the upper rack by first inserting the rear tabs into the appropriate slots in the track then snap the front tabs into place.
18
With the repair completed turn the power back on and your dishwasher should be ready for use.
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com