Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Won't Cool, Freezer Works #5303918549
Frigidaire Refrigerator Won't Cool, Freezer Works #5303918549
Skill Level
Total Parts Cost
$61.55Estimated Savings
$112.5002:58
- Description
This video provides step-by-step instructions for replacing the evaporator fan motor on Frigidaire refrigerators and freezers. The most common reasons for replacing the evaporator fan motor are when the refrigerator is loud, not cold enough, the fridge is warm but the freezer is cold, the freezer runs all the time or is not cooling.
All the information in this fan motor replacement video is applicable to the following brands: Frigidaire, Kenmore, Westinghouse, Gibson, Crosley, Universal
Tools used: nutdriver, screwdriver, wire cutter
All the information in this fan motor replacement video is applicable to the following brands: Frigidaire, Kenmore, Westinghouse, Gibson, Crosley, Universal
Tools used: nutdriver, screwdriver, wire cutter
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to take off the retaining clips and remove the freezer shelving and drawers.
3
Next, remove the screws to release the freezer’s rear interior panel or panels.
4
Lift the upper panel out of the way then pull out the evaporator fan motor shroud.
5
Disconnect the wires.
6
Remove the fan blade from the motor and well as the fan motor bracket.
7
You’re now ready to install the new evaporator fan motor.
8
If the new motor is identical to the old one, replace the motor directly.
9
If the new motor has different connectors or terminals you will first need to cut the wires near the wire junction.
10
Strip off approximately 1/3 of an inch of insulation then position the new motor into the shroud.
11
Secure with the bracket and push the fan blade on, making sure it is fully seated on the motor shaft.
12
Your next step is to cut the freezer wires as close to the connectors as possible and strip off 1/3 inch of insulation from each wire.
13
Return the shroud to the freezer and set it in place.
14
Use the provided connectors to join the corresponding wires together.
15
Crimp the connectors and make sure the wires are secure.
16
Route the wires away from the motor using the provided retaining clips and reposition the upper panel.
17
Replace the rear interior panel or panels and secure the screws.
18
Replace the drawers and shelving and use the retaining clips to secure.
19
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step instructions for replacing the evaporator fan motor on Frigidaire refrigerators and freezers. The most common reasons for replacing the evaporator fan motor are when the refrigerator is loud, not cold enough, the fridge is warm but the freezer is cold, the freezer runs all the time or is not cooling.
All the information in this fan motor replacement video is applicable to the following brands: Frigidaire, Kenmore, Westinghouse, Gibson, Crosley, Universal
Tools used: nutdriver, screwdriver, wire cutter
All the information in this fan motor replacement video is applicable to the following brands: Frigidaire, Kenmore, Westinghouse, Gibson, Crosley, Universal
Tools used: nutdriver, screwdriver, wire cutter
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to take off the retaining clips and remove the freezer shelving and drawers.
3
Next, remove the screws to release the freezer’s rear interior panel or panels.
4
Lift the upper panel out of the way then pull out the evaporator fan motor shroud.
5
Disconnect the wires.
6
Remove the fan blade from the motor and well as the fan motor bracket.
7
You’re now ready to install the new evaporator fan motor.
8
If the new motor is identical to the old one, replace the motor directly.
9
If the new motor has different connectors or terminals you will first need to cut the wires near the wire junction.
10
Strip off approximately 1/3 of an inch of insulation then position the new motor into the shroud.
11
Secure with the bracket and push the fan blade on, making sure it is fully seated on the motor shaft.
12
Your next step is to cut the freezer wires as close to the connectors as possible and strip off 1/3 inch of insulation from each wire.
13
Return the shroud to the freezer and set it in place.
14
Use the provided connectors to join the corresponding wires together.
15
Crimp the connectors and make sure the wires are secure.
16
Route the wires away from the motor using the provided retaining clips and reposition the upper panel.
17
Replace the rear interior panel or panels and secure the screws.
18
Replace the drawers and shelving and use the retaining clips to secure.
19
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Parts Needed
Evaporator Fan Motor
$61.55
Total$0.00
Related Articles & Videos
04:55
How This Part Works
Refrigerator Evaporator Fan Motor - How it Works & Installation Tips
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com