Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Replace Main Control Board #5304502779
Frigidaire Refrigerator Replace Main Control Board #5304502779
Skill Level
Total Parts Cost
$228.49Estimated Savings
$112.5002:40
- Description
This video provides step-by-step repair instructions for replacing the main control board on a Frigidaire refrigerator. The most common reason for replacing the control board is if the refrigerator is not working at all.
All of the information for this refrigerator control baord replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: flat head screwdriver
All of the information for this refrigerator control baord replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: flat head screwdriver
Step By Step Instructions
1
Before you replace the main control board in your refrigerator be sure to unplug the power cord.
2
Your first step is to pull out the freezer drawer and detach the lower grill.
3
Use a large flat-head screwdriver to pry the control board housing down then pull the housing forward to detach.
4
Note the orientation of the control board wire connecters then disconnect them.
5
Pry out the test port plug and depress the retaining tab to release the old board.
6
Install the new main control board by aligning it in the housing and snapping it into place.
7
Connect the wire connecters to the appropriate terminals.
8
Replace the test port plug.
9
Now realign the housing on the tracks and push back until it locks into position.
10
Realign the grill and snap it into place.
11
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the main control board on a Frigidaire refrigerator. The most common reason for replacing the control board is if the refrigerator is not working at all.
All of the information for this refrigerator control baord replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: flat head screwdriver
All of the information for this refrigerator control baord replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: flat head screwdriver
Step-By-Step Instructions
1
Before you replace the main control board in your refrigerator be sure to unplug the power cord.
2
Your first step is to pull out the freezer drawer and detach the lower grill.
3
Use a large flat-head screwdriver to pry the control board housing down then pull the housing forward to detach.
4
Note the orientation of the control board wire connecters then disconnect them.
5
Pry out the test port plug and depress the retaining tab to release the old board.
6
Install the new main control board by aligning it in the housing and snapping it into place.
7
Connect the wire connecters to the appropriate terminals.
8
Replace the test port plug.
9
Now realign the housing on the tracks and push back until it locks into position.
10
Realign the grill and snap it into place.
11
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Main Control Board
$228.49
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com