Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Replace Condenser Fan Motor #WR60X10350
GE Refrigerator Replace Condenser Fan Motor #WR60X10350
Skill Level
Total Parts Cost
$97.08Estimated Savings
$112.5001:36
- Description
This video provides step-by-step repair instructions for replacing the condenser fan motor on a GE refrigerator. The most common reasons for replacing the condenser fan motor are when the fridge is noisy or loud or when the fridge is not cold enough.
All of the information for this condenser fan motor replacement video is applicable to the following brands:
GE, Hotpoint, RCA
Tools needed: screwdriver, nut driver
All of the information for this condenser fan motor replacement video is applicable to the following brands:
GE, Hotpoint, RCA
Tools needed: screwdriver, nut driver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws securing the rear access panel and pull the panel off.
3
Next, remove the screws to release the brackets securing the condenser fan motor.
4
As with
any repair, be sure you unplug the
appliance before beginning.
5
Note the fan blade's orientation and position on the motor shaft, then pull it off.
6
Your first
step is to remove the screws securing
the rear access panel and pull the panel
off.
7
Disconnect the wire harness to remove the old motor.
8
Next, disconnect the fan motor wire
harness and use needle-nose pliers to
release the wire retaining clip.
9
Install the new condenser fan motor by first reconnecting the wire harness.
10
Remove
the screws securing the fan motor
mounting bracket and pull the bracket
off.
11
Then, position the motor and slide the fan blade onto the motor shaft.
12
Detach the fan blade from the motor
shaft and pull the old motor out.
13
Secure the motor with the mounting bracket and screws.
14
Install the new condenser fan motor by
first transferring the grommets from the
old motor to the new one.
15
Replace the rear access panel and secure it with the screws.
16
Now position
the new motor in the housing and fully
seat the fan blade onto the motor shaft.
17
You're now ready to plug the appliance back in to make sure it's functioning properly.
18
Secure the grounding wire if applicable
and position the mounting bracket.
19
Secure
it with the screws.
20
Snap the wire
retaining clip into place and connect
the wire harness.
21
Replace the rear access
panel and secure it with the screws.
22
You're now ready to plug the appliance
back in to make sure it's functioning
properly.
Description
This video provides step-by-step repair instructions for replacing the condenser fan motor on a GE refrigerator. The most common reasons for replacing the condenser fan motor are when the fridge is noisy or loud or when the fridge is not cold enough.
All of the information for this condenser fan motor replacement video is applicable to the following brands:
GE, Hotpoint, RCA
Tools needed: screwdriver, nut driver
All of the information for this condenser fan motor replacement video is applicable to the following brands:
GE, Hotpoint, RCA
Tools needed: screwdriver, nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws securing the rear access panel and pull the panel off.
3
Next, remove the screws to release the brackets securing the condenser fan motor.
4
As with
any repair, be sure you unplug the
appliance before beginning.
5
Note the fan blade's orientation and position on the motor shaft, then pull it off.
6
Your first
step is to remove the screws securing
the rear access panel and pull the panel
off.
7
Disconnect the wire harness to remove the old motor.
8
Next, disconnect the fan motor wire
harness and use needle-nose pliers to
release the wire retaining clip.
9
Install the new condenser fan motor by first reconnecting the wire harness.
10
Remove
the screws securing the fan motor
mounting bracket and pull the bracket
off.
11
Then, position the motor and slide the fan blade onto the motor shaft.
12
Detach the fan blade from the motor
shaft and pull the old motor out.
13
Secure the motor with the mounting bracket and screws.
14
Install the new condenser fan motor by
first transferring the grommets from the
old motor to the new one.
15
Replace the rear access panel and secure it with the screws.
16
Now position
the new motor in the housing and fully
seat the fan blade onto the motor shaft.
17
You're now ready to plug the appliance back in to make sure it's functioning properly.
18
Secure the grounding wire if applicable
and position the mounting bracket.
19
Secure
it with the screws.
20
Snap the wire
retaining clip into place and connect
the wire harness.
21
Replace the rear access
panel and secure it with the screws.
22
You're now ready to plug the appliance
back in to make sure it's functioning
properly.
Applicable Product Model
Parts Needed
Condenser Fan Motor
$97.08
Total$0.00
Related Articles & Videos
04:57
How This Part Works
Refrigerator Condenser Fan Motor - How it Works & Installation Tips
01:39
Part Replacement
GE Refrigerator Not Defrosting? Defrost Timer Replacement #WR9X489
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com