Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Dishwasher Upper Dish Rack Roller #154522902
Kenmore Dishwasher Upper Dish Rack Roller #154522902
Skill Level
Total Parts Cost
$8.79Estimated Savings
$112.5001:54
- Description
This video provides step-by-step instructions for replacing the upper dish rack roller on Kenmore dishwashers. The most common reason for replacing the roller is if the dish rack will not roller properly.
All of the information in this roller replacement video is applicable to the following brands: Kenmore
Tools used: flat head screwdriver
All of the information in this roller replacement video is applicable to the following brands: Kenmore
Tools used: flat head screwdriver
Step By Step Instructions
1
To replace an upper dish rack roller use a small flat-head screwdriver to release the retaining tabs on the front dish rack stop clips and remove both clips
2
Slide out the dish rack assembly and use a flat-head screwdriver to pry off the roller you’re replacing, if still intact.
3
Be aware – if the roller support is rusty, you may have to break the old roller to remove.
4
Before you install the new dish rack roller clean off any rust from the support.
5
Now align the roller on the support and snap it into place.
6
Realign the dish rack on the roller supports and slide it back.
7
Reposition the front stop clips on the supports and snap them closed.
8
Confirm that the rack moves freely and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the upper dish rack roller on Kenmore dishwashers. The most common reason for replacing the roller is if the dish rack will not roller properly.
All of the information in this roller replacement video is applicable to the following brands: Kenmore
Tools used: flat head screwdriver
All of the information in this roller replacement video is applicable to the following brands: Kenmore
Tools used: flat head screwdriver
Step-By-Step Instructions
1
To replace an upper dish rack roller use a small flat-head screwdriver to release the retaining tabs on the front dish rack stop clips and remove both clips
2
Slide out the dish rack assembly and use a flat-head screwdriver to pry off the roller you’re replacing, if still intact.
3
Be aware – if the roller support is rusty, you may have to break the old roller to remove.
4
Before you install the new dish rack roller clean off any rust from the support.
5
Now align the roller on the support and snap it into place.
6
Realign the dish rack on the roller supports and slide it back.
7
Reposition the front stop clips on the supports and snap them closed.
8
Confirm that the rack moves freely and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
01:27
Part Replacement
Frigidaire Dishwasher Upper Dishrack Roller Replacement (part 5304507440)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com