Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Dishwasher Dishwasher Replace Float Switch #154773201
Kenmore Dishwasher Dishwasher Replace Float Switch #154773201
Skill Level
Total Parts Cost
$58.25Estimated Savings
$112.5002:32
- Description
This video provides step-by-step instructions for replacing the float switch on Kenmore dishwashers. The most common reason for replacing the switch is if the dishwasher will not fill or overfills.
All of the information in this float switch replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
All of the information in this float switch replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
Step By Step Instructions
1
Before you replace the float switch in your dishwasher be sure to turn off the power to the appliance.
2
Using a phillips-head screwdriver, unthread the mounting screws securing the lower access panels.
3
Set both panels aside.
4
Next, use a small flat-head screwdriver to help detach the float switch actuator lever so you can unthread the mounting screw securing the switch itself.
5
Detach the wires to fully remove the old switch.
6
Before you install the new float switch make sure the actuator lever is detached.
7
Now connect the wires to the switch terminals.
8
Position the switch on the underside of the tub then thread and tighten the mounting screw.
9
With the cup-side facing up, align the actuator lever and snap it into place.
10
Realign both lower access panels and replace the screws to secure.
11
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the float switch on Kenmore dishwashers. The most common reason for replacing the switch is if the dishwasher will not fill or overfills.
All of the information in this float switch replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
All of the information in this float switch replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the float switch in your dishwasher be sure to turn off the power to the appliance.
2
Using a phillips-head screwdriver, unthread the mounting screws securing the lower access panels.
3
Set both panels aside.
4
Next, use a small flat-head screwdriver to help detach the float switch actuator lever so you can unthread the mounting screw securing the switch itself.
5
Detach the wires to fully remove the old switch.
6
Before you install the new float switch make sure the actuator lever is detached.
7
Now connect the wires to the switch terminals.
8
Position the switch on the underside of the tub then thread and tighten the mounting screw.
9
With the cup-side facing up, align the actuator lever and snap it into place.
10
Realign both lower access panels and replace the screws to secure.
11
With the repair completed turn the power back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com