Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Refrigerator Dispenser Solenoid Replacement #WR62X10055
GE Refrigerator Dispenser Solenoid Replacement #WR62X10055
Skill Level
Total Parts Cost
$53.85Estimated Savings
$112.5002:11
- Description
This video provides step-by-step instructions for replacing the dispenser solenoid on General Electric refrigerators. The most common reason for replacing the dispenser solenoid is when the fridge’s ice dispenser is not working.
All the information in this solenoid replacement video is applicable to the following brands: GE, Hotpoint, RCA
Tools used: screwdriver, nutdriver
All the information in this solenoid replacement video is applicable to the following brands: GE, Hotpoint, RCA
Tools used: screwdriver, nutdriver
Step By Step Instructions
1
To replace a leveling leg on your washer, carefully tip the washer forward or back and use a wood block, or a comparable sturdy object, to support it.
2
Use pliers to help unscrew the old leg from the base if still intact.
3
Install the new leveling leg by screwing it in as close to the base as possible.
4
Remove the support and gently lower the appliance to the floor.
5
Determine if your washer is level.
6
If it isn’t support the washer as you adjust the leg accordingly.
7
Repeat this procedure until you can confirm that the washer is level and ready for use.
Description
This video provides step-by-step instructions for replacing the dispenser solenoid on General Electric refrigerators. The most common reason for replacing the dispenser solenoid is when the fridge’s ice dispenser is not working.
All the information in this solenoid replacement video is applicable to the following brands: GE, Hotpoint, RCA
Tools used: screwdriver, nutdriver
All the information in this solenoid replacement video is applicable to the following brands: GE, Hotpoint, RCA
Tools used: screwdriver, nutdriver
Step-By-Step Instructions
1
To replace a leveling leg on your washer, carefully tip the washer forward or back and use a wood block, or a comparable sturdy object, to support it.
2
Use pliers to help unscrew the old leg from the base if still intact.
3
Install the new leveling leg by screwing it in as close to the base as possible.
4
Remove the support and gently lower the appliance to the floor.
5
Determine if your washer is level.
6
If it isn’t support the washer as you adjust the leg accordingly.
7
Repeat this procedure until you can confirm that the washer is level and ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com