Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Dish Rack Support Rail Roller Replacement #WP8575897
Whirlpool Dishwasher Dish Rack Support Rail Roller Replacement #WP8575897
Skill Level
Total Parts Cost
$13.54Estimated Savings
$112.5002:30
- Description
This video provides step-by-step instructions for replacing the rail support roller on Whirlpool dishwashers. The most common reason for replacing the roller is if the dish rack will not roll properly.
All of the information in this roller replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
All of the information in this roller replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
Step By Step Instructions
1
To replace a support rail roller assembly first depress the tabs to release both front stop clips.
2
You can now slide the upper dish rack out.
3
If you’re replacing a rear support rail roller assembly, use a small flat-head screwdriver to depress the retaining tab to release the appropriate rear stop clip.
4
Pull the clip up to remove and you can slide out the support rail.
5
Use a 3/16th inch socket or nut driver to unthread the mounting screws securing the old roller assembly.
6
Install the new roller assembly by aligning it on the tub wall then thread and tighten the mounting screws.
7
If necessary, align the support rail on the rollers insert the rear stop clip from the top and press down to snap it into place.
8
Align the upper dish rack rollers on the support rails and slide the dish rack back.
9
Reposition the front stop clips and snap them into place.
10
Confirm that the rack moves freely and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the rail support roller on Whirlpool dishwashers. The most common reason for replacing the roller is if the dish rack will not roll properly.
All of the information in this roller replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
All of the information in this roller replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
Step-By-Step Instructions
1
To replace a support rail roller assembly first depress the tabs to release both front stop clips.
2
You can now slide the upper dish rack out.
3
If you’re replacing a rear support rail roller assembly, use a small flat-head screwdriver to depress the retaining tab to release the appropriate rear stop clip.
4
Pull the clip up to remove and you can slide out the support rail.
5
Use a 3/16th inch socket or nut driver to unthread the mounting screws securing the old roller assembly.
6
Install the new roller assembly by aligning it on the tub wall then thread and tighten the mounting screws.
7
If necessary, align the support rail on the rollers insert the rear stop clip from the top and press down to snap it into place.
8
Align the upper dish rack rollers on the support rails and slide the dish rack back.
9
Reposition the front stop clips and snap them into place.
10
Confirm that the rack moves freely and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
00:58
Part Replacement
Whirlpool Dishwasher Front Dish Rack Stop Clip Replacement #WPW10082861
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com