Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Door Handle Replacement #W10629511
Whirlpool Dishwasher Door Handle Replacement #W10629511
Skill Level
Total Parts Cost
$30.10Estimated Savings
$112.5004:09
- Description
This video provides step-by-step instructions for replacing the door handle on Whirlpool dishwashers. The most common reason for replacing the handle is if it is damaged.
All of the information in this handle replacement video is applicable to the following brands: Whirlpool
Tools used: T-15 Torx bit, flat head screwdriver
All of the information in this handle replacement video is applicable to the following brands: Whirlpool
Tools used: T-15 Torx bit, flat head screwdriver
Step By Step Instructions
1
Before you replace the door handle on your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a t-15 torx bit to unthread all of the screws holding the inner and outer door panels together.
3
Separate the panels and rotate the control board housing retaining latch out of the way.
4
Use a small flat-head screwdriver to gently pry back the mounting brackets to release the control board housing.
5
To reduce strain on the control board wires, use a wire tie to secure the housing to the inner door panel.
6
Lift off the outer door panel.
7
Use a small flat-head screwdriver to help detach the retaining clips holding the handle and the control panel to the door panel.
8
Release the tabs so you can fully remove the control panel.
9
Depress the tabs to release the old door handle.
10
Install the new door handle by aligning it on the control panel and snapping it into place.
11
Realign the control panel on the outer door panel and snap it into position.
12
Secure it with the two retaining clips.
13
Set the outer door panel on the hinges.
14
Snap the control board housing into place on the outer door panel and rotate the retaining latch down.
15
Join the inner and outer door panels together and rethread all of the screws to secure.
16
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the door handle on Whirlpool dishwashers. The most common reason for replacing the handle is if it is damaged.
All of the information in this handle replacement video is applicable to the following brands: Whirlpool
Tools used: T-15 Torx bit, flat head screwdriver
All of the information in this handle replacement video is applicable to the following brands: Whirlpool
Tools used: T-15 Torx bit, flat head screwdriver
Step-By-Step Instructions
1
Before you replace the door handle on your dishwasher be sure to turn off the power to the appliance.
2
Open the dishwasher door and use a t-15 torx bit to unthread all of the screws holding the inner and outer door panels together.
3
Separate the panels and rotate the control board housing retaining latch out of the way.
4
Use a small flat-head screwdriver to gently pry back the mounting brackets to release the control board housing.
5
To reduce strain on the control board wires, use a wire tie to secure the housing to the inner door panel.
6
Lift off the outer door panel.
7
Use a small flat-head screwdriver to help detach the retaining clips holding the handle and the control panel to the door panel.
8
Release the tabs so you can fully remove the control panel.
9
Depress the tabs to release the old door handle.
10
Install the new door handle by aligning it on the control panel and snapping it into place.
11
Realign the control panel on the outer door panel and snap it into position.
12
Secure it with the two retaining clips.
13
Set the outer door panel on the hinges.
14
Snap the control board housing into place on the outer door panel and rotate the retaining latch down.
15
Join the inner and outer door panels together and rethread all of the screws to secure.
16
With the repair completed turn the power back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
00:58
Part Replacement
Whirlpool Dishwasher Front Dish Rack Stop Clip Replacement #WPW10082861
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com