Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Wash Sensor Replacement #W10723295
Whirlpool Dishwasher Wash Sensor Replacement #W10723295
Skill Level
Total Parts Cost
$56.33Estimated Savings
$112.5002:13
- Description
This video provides step-by-step instructions for replacing the wash sensor on Whirlpool dishwashers. The most common reason for replacing the sensor is if the dishwasher is not cleaning properly.
All of the information in this sensor replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
All of the information in this sensor replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
Step By Step Instructions
1
Before you replace the wash sensor in your dishwasher be sure to turn off the power to the appliance.
2
Using a flat-head screwdriver, rotate the lower access panel fasteners counter-clockwise a quarter-turn to detach.
3
Remove the access panel and the attached insulation.
4
Reach under the dishwasher and rotate the wash sensor counter-clockwise to detach it from the sump.
5
Depress the retaining tab to disconnect the wire connecter and you can remove the old sensor.
6
Install the new wash sensor by first connecting the wire connecter.
7
Now insert the sensor into the sump and rotate clockwise to lock it into place.
8
Reposition the access panel, making sure the attached insulation does not interfere with the float assembly and the lower edge of the panel touches the floor.
9
Secure the panel by rotating the fasteners clockwise a quarter turn.
10
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the wash sensor on Whirlpool dishwashers. The most common reason for replacing the sensor is if the dishwasher is not cleaning properly.
All of the information in this sensor replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
All of the information in this sensor replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver
Step-By-Step Instructions
1
Before you replace the wash sensor in your dishwasher be sure to turn off the power to the appliance.
2
Using a flat-head screwdriver, rotate the lower access panel fasteners counter-clockwise a quarter-turn to detach.
3
Remove the access panel and the attached insulation.
4
Reach under the dishwasher and rotate the wash sensor counter-clockwise to detach it from the sump.
5
Depress the retaining tab to disconnect the wire connecter and you can remove the old sensor.
6
Install the new wash sensor by first connecting the wire connecter.
7
Now insert the sensor into the sump and rotate clockwise to lock it into place.
8
Reposition the access panel, making sure the attached insulation does not interfere with the float assembly and the lower edge of the panel touches the floor.
9
Secure the panel by rotating the fasteners clockwise a quarter turn.
10
With the repair completed turn the power back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
00:58
Part Replacement
Whirlpool Dishwasher Front Dish Rack Stop Clip Replacement #WPW10082861
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com