Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Control Board Replacement #W10906426
Whirlpool Dishwasher Control Board Replacement #W10906426
Skill Level
Total Parts Cost
$204.07Estimated Savings
$112.5003:53
- Description
This video provides step-by-step instructions for replacing the control board on Whirlpool dishwashers. The most common reason for replacing the board is if the dishwasher will not work at all.
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver, T-15 Torx bit
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver, T-15 Torx bit
Step By Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the dishwasher control board…
6
…be sure to turn off the power to the appliance.
7
Open the dishwasher door…and use a t-15 torx bit to unthread all of the screws holding the inner and outer door panels together.
8
Separate the panels…
9
…and rotate the control board housing retaining latch out of the way.
10
Use a small flat-head screwdriver to gently pry back the mounting brackets to release the control board housing.
11
Lift off the outer door panel and set it aside.
12
Depress the tabs to release the small wire cover.
13
Release the long wire cover tabs and roatate the cover to detach.
14
Note the orientation of the wires…
15
…then disconnect them from the control board.
16
Install the new control board…
17
…by first connecting the wires to the appropriate terminals.
18
Align the long wire cover and snap it into place.
19
Do the same for the small wire cover.
20
Now set the outer door panel on the hinges.
21
Snap the new control board housing into place on the outer panel and rotate the retaining latch down.
22
Join the inner and outer door panels together…
23
…and rethread all of the screws to secure.
24
With the repair completed…
25
…turn the power back on…
26
…and your dishwasher should be ready for use.
27
At repairclinic – we make fixing things easy.
28
Thank you for supporting the production of these videos by purchasing your parts from our website.
Description
This video provides step-by-step instructions for replacing the control board on Whirlpool dishwashers. The most common reason for replacing the board is if the dishwasher will not work at all.
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver, T-15 Torx bit
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: flat head screwdriver, T-15 Torx bit
Step-By-Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the dishwasher control board…
6
…be sure to turn off the power to the appliance.
7
Open the dishwasher door…and use a t-15 torx bit to unthread all of the screws holding the inner and outer door panels together.
8
Separate the panels…
9
…and rotate the control board housing retaining latch out of the way.
10
Use a small flat-head screwdriver to gently pry back the mounting brackets to release the control board housing.
11
Lift off the outer door panel and set it aside.
12
Depress the tabs to release the small wire cover.
13
Release the long wire cover tabs and roatate the cover to detach.
14
Note the orientation of the wires…
15
…then disconnect them from the control board.
16
Install the new control board…
17
…by first connecting the wires to the appropriate terminals.
18
Align the long wire cover and snap it into place.
19
Do the same for the small wire cover.
20
Now set the outer door panel on the hinges.
21
Snap the new control board housing into place on the outer panel and rotate the retaining latch down.
22
Join the inner and outer door panels together…
23
…and rethread all of the screws to secure.
24
With the repair completed…
25
…turn the power back on…
26
…and your dishwasher should be ready for use.
27
At repairclinic – we make fixing things easy.
28
Thank you for supporting the production of these videos by purchasing your parts from our website.
Applicable Product Model
Related Articles & Videos
00:58
Part Replacement
Whirlpool Dishwasher Front Dish Rack Stop Clip Replacement #WPW10082861
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com