Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Upper Dishrack Stop Clip Replacement #W10567560
Whirlpool Dishwasher Upper Dishrack Stop Clip Replacement #W10567560
Skill Level
Total Parts Cost
$12.71Estimated Savings
$112.5001:26
- Description
This video provides step-by-step instructions for replacing the dishrack stop clip on Whirlpool dishwasher model #WDF550SAFS. The most common reason for replacing the clip is if the dishrack will not stay properly on the rail.
All of the information in this dishrack stop clip replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
All of the information in this dishrack stop clip replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
Step By Step Instructions
1
If you need to replace a rear stop clip for the upper dish rack pull the retaining tabs out to pivot the front stop clips.
2
You can now fully remove the upper dish rack.
3
Use a small flat-head screwdriver to help release the old stop clip from the support rail if still intact.
4
Install the new stop clip by aligning it on the support rail and snapping it into place.
5
Align the upper dish rack rollers on the support rails slide the dish rack back and snap the front stop clips closed.
Description
This video provides step-by-step instructions for replacing the dishrack stop clip on Whirlpool dishwasher model #WDF550SAFS. The most common reason for replacing the clip is if the dishrack will not stay properly on the rail.
All of the information in this dishrack stop clip replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
All of the information in this dishrack stop clip replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
If you need to replace a rear stop clip for the upper dish rack pull the retaining tabs out to pivot the front stop clips.
2
You can now fully remove the upper dish rack.
3
Use a small flat-head screwdriver to help release the old stop clip from the support rail if still intact.
4
Install the new stop clip by aligning it on the support rail and snapping it into place.
5
Align the upper dish rack rollers on the support rails slide the dish rack back and snap the front stop clips closed.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com