Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Adapter Board Replacement #W10891576
Whirlpool Dishwasher Adapter Board Replacement #W10891576
Skill Level
Total Parts Cost
$233.60Estimated Savings
$112.5003:46
- Description
This video provides step-by-step instructions for replacing the adapter board on Whirlpool dishwasher model #WDF550SAFS. The most common reason for replacing the board is if the dishwasher will not run.
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
Step By Step Instructions
1
Be sure to turn off the power to the appliance.
2
Use a Phillips head screwdriver to unthread all of the screws securing the console to the inner door panel.
3
We recommend placing a towel over the top edge of the outer door panel to protect the wires.
4
Next, unthread the screws securing the main control board cover.
5
Detach the cover.
6
Use an awl to help detach the adapter board wire connectors from the main control board.
7
Now, unthread the mounting screws securing the control board.
8
Release the old adapter board from the console and disconnect the ribbon connector.
9
Install the new ribbon connector adapter board by first connecting the ribbon connector.
10
Now, snap the new board into position on the console.
11
Reposition the control board and rethread the mounting screws to secure.
12
Connect the adapter board wire connectors to the control board.
13
Realign the control board cover and secure it with the screws.
14
Now, reposition the console on the inner and outer door panels.
15
Thread and tighten all of the screws.
16
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the adapter board on Whirlpool dishwasher model #WDF550SAFS. The most common reason for replacing the board is if the dishwasher will not run.
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
All of the information in this board replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
Be sure to turn off the power to the appliance.
2
Use a Phillips head screwdriver to unthread all of the screws securing the console to the inner door panel.
3
We recommend placing a towel over the top edge of the outer door panel to protect the wires.
4
Next, unthread the screws securing the main control board cover.
5
Detach the cover.
6
Use an awl to help detach the adapter board wire connectors from the main control board.
7
Now, unthread the mounting screws securing the control board.
8
Release the old adapter board from the console and disconnect the ribbon connector.
9
Install the new ribbon connector adapter board by first connecting the ribbon connector.
10
Now, snap the new board into position on the console.
11
Reposition the control board and rethread the mounting screws to secure.
12
Connect the adapter board wire connectors to the control board.
13
Realign the control board cover and secure it with the screws.
14
Now, reposition the console on the inner and outer door panels.
15
Thread and tighten all of the screws.
16
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com