Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Dishwasher Touch Pad Overlay Replacement #W10891596
Whirlpool Dishwasher Touch Pad Overlay Replacement #W10891596
Skill Level
Total Parts Cost
$218.83Estimated Savings
$112.5005:06
- Description
This video provides step-by-step instructions for replacing the touch pad overlay on Whirlpool dishwasher model #WDF550SAFS. The most common reason for replacing the overlay is if it is damaged or dirty.
All of the information in this overlay replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
All of the information in this overlay replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
Step By Step Instructions
1
Before you replace the touchpad overlay on your dishwasher, be sure to turn off the power to the appliance.
2
Use a Phillips head screwdriver to unthread all of the screws securing the console to the inner door panel.
3
We recommend placing a towel over the top edge of the outer door panel to protect the wires.
4
Next, unthread the screws securing the main control board cover.
5
Detach the cover and unthread the screws securing the board itself.
6
Detach the ribbon connector adapter board and disconnect the ribbon connector from the board.
7
Remove the insulator foam.
8
You can now use a razor blade to help peel off the old overlay.
9
Before you install the new touchpad overlay, clean off any residue from the console.
10
Now peel the backing off of the overlay to expose the adhesive.
11
Insert the ribbon connector through the slot in the console and align the new overlay.
12
Press firmly to secure.
13
Realign the insulator foam.
14
You may need to apply some fresh glue to ensure the foam will adhere.
15
Connect the ribbon connector to the adapter board and snap the board into place.
16
Reposition the main control board and rethread the screws.
17
Replace the cover and secure it with the screws.
18
Position the council on the inner and outer door panels.
19
Thread and tighten all of the screws.
20
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the touch pad overlay on Whirlpool dishwasher model #WDF550SAFS. The most common reason for replacing the overlay is if it is damaged or dirty.
All of the information in this overlay replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
All of the information in this overlay replacement video is applicable to the following brands: Whirlpool
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the touchpad overlay on your dishwasher, be sure to turn off the power to the appliance.
2
Use a Phillips head screwdriver to unthread all of the screws securing the console to the inner door panel.
3
We recommend placing a towel over the top edge of the outer door panel to protect the wires.
4
Next, unthread the screws securing the main control board cover.
5
Detach the cover and unthread the screws securing the board itself.
6
Detach the ribbon connector adapter board and disconnect the ribbon connector from the board.
7
Remove the insulator foam.
8
You can now use a razor blade to help peel off the old overlay.
9
Before you install the new touchpad overlay, clean off any residue from the console.
10
Now peel the backing off of the overlay to expose the adhesive.
11
Insert the ribbon connector through the slot in the console and align the new overlay.
12
Press firmly to secure.
13
Realign the insulator foam.
14
You may need to apply some fresh glue to ensure the foam will adhere.
15
Connect the ribbon connector to the adapter board and snap the board into place.
16
Reposition the main control board and rethread the screws.
17
Replace the cover and secure it with the screws.
18
Position the council on the inner and outer door panels.
19
Thread and tighten all of the screws.
20
With the repair completed, turn the power supply back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com