Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Door Handle Installation #W10701399
KitchenAid Dishwasher Door Handle Installation #W10701399
Skill Level
Total Parts Cost
$78.26Estimated Savings
$112.5002:01
- Description
This video provides step-by-step repair instructions for installing a door handle on KitchenAid dishwasher model #KDTE204EPA3.
All of the information for this handle installation video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 3/16" drill bit
All of the information for this handle installation video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 3/16" drill bit
Step By Step Instructions
1
When installing a dishwasher door handle on a custom wood panel, the handles should be centered on the panel and positioned 2 to 5 inches from the top edge.
2
Measure the distance between the screw holes on the handle or the holes where the mounting studs will be inserted.
3
Mark the panel accordingly.
4
Use a 3/16 inch or appropriate size drill bit to drill pilot holes through the front of the panel.
5
Use an appropriate size drill bit to drill out the areas surrounding the screw holes on the back of the panel to countersink the holes.
6
Now, insert mounting screws through the back of the panel, making sure the heads of the screws are flush with the panel surface.
7
Align the handle and thread the screws into the handle or thread the mounting studs onto the ends of the screws and tighten if applicable.
8
Use an appropriate sized allen wrench to thread the two set screws loosely into the handle.
9
Align the handle on the mounting studs and use the allen wrench to tighten the set screws.
Description
This video provides step-by-step repair instructions for installing a door handle on KitchenAid dishwasher model #KDTE204EPA3.
All of the information for this handle installation video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 3/16" drill bit
All of the information for this handle installation video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: 3/16" drill bit
Step-By-Step Instructions
1
When installing a dishwasher door handle on a custom wood panel, the handles should be centered on the panel and positioned 2 to 5 inches from the top edge.
2
Measure the distance between the screw holes on the handle or the holes where the mounting studs will be inserted.
3
Mark the panel accordingly.
4
Use a 3/16 inch or appropriate size drill bit to drill pilot holes through the front of the panel.
5
Use an appropriate size drill bit to drill out the areas surrounding the screw holes on the back of the panel to countersink the holes.
6
Now, insert mounting screws through the back of the panel, making sure the heads of the screws are flush with the panel surface.
7
Align the handle and thread the screws into the handle or thread the mounting studs onto the ends of the screws and tighten if applicable.
8
Use an appropriate sized allen wrench to thread the two set screws loosely into the handle.
9
Align the handle on the mounting studs and use the allen wrench to tighten the set screws.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com