Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Dishrack Roller Replacement #WPW10195417
KitchenAid Dishwasher Dishrack Roller Replacement #WPW10195417
Skill Level
Total Parts Cost
$48.45Estimated Savings
$112.5001:16
- Description
This video provides step-by-step repair instructions for replacing the dishrack roller on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the roller is if the dishrack will not slide easily.
All of the information for this dishrack roller replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
All of the information for this dishrack roller replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
Step By Step Instructions
1
To replace a lower dish rack roller assembly, pull out the lower dish rack and remove the utensil basket.
2
If still intact, detach the old roller assembly from the rack.
3
If you’re installing a new rear roller assembly you’ll need to first align the end of the adjustable tines with the middle slot in the assembly then snap the assembly into place on the rack.
4
Replace the utensil basket and confirm the rack moves freely.
Description
This video provides step-by-step repair instructions for replacing the dishrack roller on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the roller is if the dishrack will not slide easily.
All of the information for this dishrack roller replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
All of the information for this dishrack roller replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
Step-By-Step Instructions
1
To replace a lower dish rack roller assembly, pull out the lower dish rack and remove the utensil basket.
2
If still intact, detach the old roller assembly from the rack.
3
If you’re installing a new rear roller assembly you’ll need to first align the end of the adjustable tines with the middle slot in the assembly then snap the assembly into place on the rack.
4
Replace the utensil basket and confirm the rack moves freely.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com