Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Water Supply Tube Bracket Replacement #W10837623 
KitchenAid Dishwasher Water Supply Tube Bracket Replacement #W10837623
Skill Level
Total Parts Cost
$24.77Estimated Savings
$112.5001:47
- Description
This video provides step-by-step repair instructions for replacing the water supply tube bracket on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the bracket is if the water supply tube is not attached properly.
All of the information for this bracket replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
All of the information for this bracket replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
Step By Step Instructions
1
To replace the water supply tube support bracket in your dishwasher, pull the upper dish rack out and depress the retaining tabs to fully remove the rack from the rails.
2
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
3
If still intact, release the water supply tube from the retainer on the top of the tub and slide off the old support bracket.
4
Install the new support bracket by aligning it on the supply tube then snap it into the retainer on the top of the tub.
5
Realign the upper tray on the rails and flip the stop clips closed.
6
Position the upper dish rack on the support rails and snap it into place.
Description
This video provides step-by-step repair instructions for replacing the water supply tube bracket on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the bracket is if the water supply tube is not attached properly.
All of the information for this bracket replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
All of the information for this bracket replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
Step-By-Step Instructions
1
To replace the water supply tube support bracket in your dishwasher, pull the upper dish rack out and depress the retaining tabs to fully remove the rack from the rails.
2
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
3
If still intact, release the water supply tube from the retainer on the top of the tub and slide off the old support bracket.
4
Install the new support bracket by aligning it on the supply tube then snap it into the retainer on the top of the tub.
5
Realign the upper tray on the rails and flip the stop clips closed.
6
Position the upper dish rack on the support rails and snap it into place.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com