Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Pump Cover Replacement #WPW10455272
KitchenAid Dishwasher Pump Cover Replacement #WPW10455272
Skill Level
Total Parts Cost
$52.94Estimated Savings
$112.5003:08
- Description
This video provides step-by-step repair instructions for replacing the pump cover on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the cover is if the dishwasher is not draining properly.
All of the information for this pump cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
All of the information for this pump cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
Step By Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
To replace the pump cover in your dishwasher, remove the lower dishrack…
6
…and rotate the wash arm locking nut counter-clockwise to release the arm.
7
Detach the manifold inlet tube from the pump cover.
8
Now lift the manifold up and pull it forward to remove.
9
Pull the upper dishrack out…
10
…and depress the retaining tabs to fully remove the rack from the rails.
11
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
12
Release the water supply tube from the retainers on the top and rear of the tub.
13
Detach the supply tube from the pump cover to fully remove.
14
Release the tab and rotate the old pump cover counter-clockwise to detach.
15
Install the new pump cover…
16
…by aligning it in the sump and rotating it clockwise to lock it into place.
17
Now insert the water supply tube into the pump cover.
18
Confirm that the support bracket is in place at the top of the supply tube…
19
…then snap the supply tube into the retainers on the rear and top of the tub.
20
Realign the upper tray on the rails and flip the stop clips closed.
21
Position the upper dishrack on the support rails and snap it into place.
22
Realign the proscrub manifold on the water supply tube and push down to lock it into place.
23
Insert the inlet tube into the pump cover.
24
Realign the wash arm on the support then rotate the locking nut clockwise to secure.
25
Replace the lower dishrack and your dishwasher should be ready for use.
26
At repairclinic – we make fixing things easy.
27
Thank you for supporting the production of these videos by purchasing your parts from our website.
Description
This video provides step-by-step repair instructions for replacing the pump cover on KitchenAid dishwasher model #KDTE204EPA3. The most common reason for replacing the cover is if the dishwasher is not draining properly.
All of the information for this pump cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
All of the information for this pump cover replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Tools needed: none
Step-By-Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
To replace the pump cover in your dishwasher, remove the lower dishrack…
6
…and rotate the wash arm locking nut counter-clockwise to release the arm.
7
Detach the manifold inlet tube from the pump cover.
8
Now lift the manifold up and pull it forward to remove.
9
Pull the upper dishrack out…
10
…and depress the retaining tabs to fully remove the rack from the rails.
11
Next, pull out the upper tray and flip open the stop clips to fully remove the tray.
12
Release the water supply tube from the retainers on the top and rear of the tub.
13
Detach the supply tube from the pump cover to fully remove.
14
Release the tab and rotate the old pump cover counter-clockwise to detach.
15
Install the new pump cover…
16
…by aligning it in the sump and rotating it clockwise to lock it into place.
17
Now insert the water supply tube into the pump cover.
18
Confirm that the support bracket is in place at the top of the supply tube…
19
…then snap the supply tube into the retainers on the rear and top of the tub.
20
Realign the upper tray on the rails and flip the stop clips closed.
21
Position the upper dishrack on the support rails and snap it into place.
22
Realign the proscrub manifold on the water supply tube and push down to lock it into place.
23
Insert the inlet tube into the pump cover.
24
Realign the wash arm on the support then rotate the locking nut clockwise to secure.
25
Replace the lower dishrack and your dishwasher should be ready for use.
26
At repairclinic – we make fixing things easy.
27
Thank you for supporting the production of these videos by purchasing your parts from our website.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com