Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairToro Lawn Mower Fuse Replacement #99-6124
Toro Lawn Mower Fuse Replacement #99-6124
Skill Level
Total Parts Cost
$7.86Estimated Savings
$112.5001:40
- Description
This video provides step-by-step instructions for replacing the fuse on Toro and Lawn Boy lawn mowers. The most common reason for replacing the fuse is when a short causes the fuse to blow.
All the information in this fuse replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: Phillips head screwdriver
All the information in this fuse replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: Phillips head screwdriver
Step By Step Instructions
1
Before you begin the repair, make sure the mower’s engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to lift up the mower’s rear shield and remove the grass bag and frame.
3
Now support the shield and remove the mounting screw securing the battery and fuse housing.
4
If applicable, peel off the sealing tape.
5
Slide the housing out to access the fuse and pull the old fuse out.
6
Install the new fuse by carefully inserting it into the housing.
7
Slide the housing back into place.
8
If applicable, replace the sealing tape. Otherwise, you can use duct tape to seal the compartment.
9
Replace the mounting screw.
10
Remove the rear shield support set the grass bag and frame into place and reattach the spark plug wire and boot.
Description
This video provides step-by-step instructions for replacing the fuse on Toro and Lawn Boy lawn mowers. The most common reason for replacing the fuse is when a short causes the fuse to blow.
All the information in this fuse replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: Phillips head screwdriver
All the information in this fuse replacement video is applicable to the following brands: Toro, Lawn Boy
Tools used: Phillips head screwdriver
Step-By-Step Instructions
1
Before you begin the repair, make sure the mower’s engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to lift up the mower’s rear shield and remove the grass bag and frame.
3
Now support the shield and remove the mounting screw securing the battery and fuse housing.
4
If applicable, peel off the sealing tape.
5
Slide the housing out to access the fuse and pull the old fuse out.
6
Install the new fuse by carefully inserting it into the housing.
7
Slide the housing back into place.
8
If applicable, replace the sealing tape. Otherwise, you can use duct tape to seal the compartment.
9
Replace the mounting screw.
10
Remove the rear shield support set the grass bag and frame into place and reattach the spark plug wire and boot.
Applicable Product Model
Parts Needed
Fuse
$7.86
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com