Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Canopy Vent Hood 36" Access Panel Replacement #W10735373
Kitchenaid Canopy Vent Hood 36" Access Panel Replacement #W10735373
Skill Level
Total Parts Cost
$152.95Estimated Savings
$112.5001:39
- Description
This video provides step-by-step repair instructions for replacing the access panel on a Kitchenaid Canopy Vent Hood (model #KVWB400DSS). The most common reason for replacing the panel is if it is damaged or dirty.
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: flat head screwdriver
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: flat head screwdriver
Step By Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Before you replace the access panel on your canopy vent hood…
5
…place a blanket over the cooktop to protect the surface.
6
Now rotate the access panel down.
7
Use a flat-head screwdriver to loosen the two screws securing the panel.
8
Fully unthread the screws to release the old panel.
9
Install the new access panel…
10
…by aligning the hinges…
11
…then thread and tighten the two screws to secure.
12
Once the rear of the panel is secured, rotate the panel up…snap it into position…
13
…and the vent hood should be ready for use.
14
At repairclinic – we make fixing things easy.
15
Thank you for supporting the production of these videos by purchasing your parts from our website.
Description
This video provides step-by-step repair instructions for replacing the access panel on a Kitchenaid Canopy Vent Hood (model #KVWB400DSS). The most common reason for replacing the panel is if it is damaged or dirty.
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: flat head screwdriver
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: flat head screwdriver
Step-By-Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Before you replace the access panel on your canopy vent hood…
5
…place a blanket over the cooktop to protect the surface.
6
Now rotate the access panel down.
7
Use a flat-head screwdriver to loosen the two screws securing the panel.
8
Fully unthread the screws to release the old panel.
9
Install the new access panel…
10
…by aligning the hinges…
11
…then thread and tighten the two screws to secure.
12
Once the rear of the panel is secured, rotate the panel up…snap it into position…
13
…and the vent hood should be ready for use.
14
At repairclinic – we make fixing things easy.
15
Thank you for supporting the production of these videos by purchasing your parts from our website.
Applicable Product Model
Parts Needed
Access Panel
$152.95
Total$0.00
Related Articles & Videos
05:33
Part Replacement
Kitchenaid Canopy Vent Hood Main Control Assembly Replacement #WPW10727063
05:10
Part Replacement
Kitchenaid Canopy Vent Hood Blower Assembly Replacement #W10735405
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com