Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Gas Cooktop Left Rear Gas Supply Tubing Replacement #W10566295
Whirlpool Gas Cooktop Left Rear Gas Supply Tubing Replacement #W10566295
Skill Level
Total Parts Cost
$53.50Estimated Savings
$112.5004:03
- Description
This video provides step-by-step instructions for replacing the left rear gas supply tubing on Whirlpool gas cooktops (model #WCG97US0DS00). The most common reason for replacing the tubing is if the gas is not reaching the left rear burner.
All of the information in this tubing replacement video is applicable to the following brands: Whirlpool
All of the information in this tubing replacement video is applicable to the following brands: Whirlpool
Step By Step Instructions
1
Whirlpool Gas Cooktop - WCG97US0DS00
2
Gas Cooktop Left Rear Gas Supply Tubing Replacement
3
Tools needed: T-20 Torx bit, half-inch wrench
4
Shock
5
Be sure to unplug the power cord.
6
Fire
7
Shut off the gas supply.
8
Heavy
9
Carefully lift off all three grates.
10
Remove all five burner caps and burner bases.
11
Remove all of the control knobs.
12
You can use string or wire to help pull them off of the valve stems.
13
Now use a T-20 Torx bit to unthread all of the screws securing the orifice holders to the main top.
14
Sharp
15
With the screws unthreaded, you can lift off the top.
16
Use a half-inch wrench to unthread the nuts securing the tubing to the valve and the orifice holder.
17
Detach the old tubing.
18
Install the new gas supply tubing by inserting the ends into the orifice holder and the valve, then tighten the nuts to secure.
19
Realign the main top on the base so the spark electrodes protrude through the holes in the top.
20
Confirm that the orifice holders are aligned?then thread and tighten the screws to secure the holders to the main top.
21
Replace the control knobs by aligning them on the valve stems and pushing them into place.
22
Align each burner base with the appropriate orifice holder so the igniter electrode protrudes through the hole in the base.
23
Next, position the burner caps on the bases.
24
Align the three burner grates on the support brackets and gently lower them.
25
With the repair completed, turn the gas supply back on, plug the power cord back in and your gas cooktop should be ready for use.
Description
This video provides step-by-step instructions for replacing the left rear gas supply tubing on Whirlpool gas cooktops (model #WCG97US0DS00). The most common reason for replacing the tubing is if the gas is not reaching the left rear burner.
All of the information in this tubing replacement video is applicable to the following brands: Whirlpool
All of the information in this tubing replacement video is applicable to the following brands: Whirlpool
Step-By-Step Instructions
1
Whirlpool Gas Cooktop - WCG97US0DS00
2
Gas Cooktop Left Rear Gas Supply Tubing Replacement
3
Tools needed: T-20 Torx bit, half-inch wrench
4
Shock
5
Be sure to unplug the power cord.
6
Fire
7
Shut off the gas supply.
8
Heavy
9
Carefully lift off all three grates.
10
Remove all five burner caps and burner bases.
11
Remove all of the control knobs.
12
You can use string or wire to help pull them off of the valve stems.
13
Now use a T-20 Torx bit to unthread all of the screws securing the orifice holders to the main top.
14
Sharp
15
With the screws unthreaded, you can lift off the top.
16
Use a half-inch wrench to unthread the nuts securing the tubing to the valve and the orifice holder.
17
Detach the old tubing.
18
Install the new gas supply tubing by inserting the ends into the orifice holder and the valve, then tighten the nuts to secure.
19
Realign the main top on the base so the spark electrodes protrude through the holes in the top.
20
Confirm that the orifice holders are aligned?then thread and tighten the screws to secure the holders to the main top.
21
Replace the control knobs by aligning them on the valve stems and pushing them into place.
22
Align each burner base with the appropriate orifice holder so the igniter electrode protrudes through the hole in the base.
23
Next, position the burner caps on the bases.
24
Align the three burner grates on the support brackets and gently lower them.
25
With the repair completed, turn the gas supply back on, plug the power cord back in and your gas cooktop should be ready for use.
Applicable Product Model
Parts Needed
Gas Tube or Connector
$53.50
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
04:18
Part Replacement
Whirlpool Gas Cooktop Center Spark Electrode Replacement #W10852959
05:16
Part Replacement
Whirlpool Gas Cooktop Right Front Gas Valve Replacement #W10859922
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com