Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairBriggs & Stratton Small Engine Replace Exhaust Gasket #691893
Briggs & Stratton Small Engine Replace Exhaust Gasket #691893
Skill Level
Total Parts Cost
$5.11Estimated Savings
$112.5001:50
- Description
This video provides step-by-step repair instructions for replacing the exhaust gasket on a Briggs and Stratton small engine (which is commonly found in lawn mowers, riding tractors, zero-turn radius mowers, wheeled edgers, pressure washers, generators, log splitters, and snowblowers). The most common reason for replacing the exhaust gasket is when the engine runs poorly.
All of the information for this exhaust gasket replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere
Tools needed: nut driver, socket wrench, flathead screwdriver
All of the information for this exhaust gasket replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere
Tools needed: nut driver, socket wrench, flathead screwdriver
Step By Step Instructions
1
Before you begin this repair, make sure the engine has cooled remove the wire and boot from the spark plug and turn off the fuel valve.
2
Your first step is to remove the screws and bolt securing the muffler guard.
3
Now pull the guard off.
4
Next, remove the mounting bolts securing the muffler itself and pull the muffler out to access the exhaust gasket.
5
If still intact, remove the old gasket.
6
Install the new exhaust gasket by positioning it in the cylinder head.
7
Now reinsert the muffler and align it with the gasket then secure both with the mounting bolts.
8
Reposition the guard and secure it with the screws and bolt.
9
With the new exhaust gasket in place, you can now turn the fuel valve back on and reattach the spark plug wire and boot.
Description
This video provides step-by-step repair instructions for replacing the exhaust gasket on a Briggs and Stratton small engine (which is commonly found in lawn mowers, riding tractors, zero-turn radius mowers, wheeled edgers, pressure washers, generators, log splitters, and snowblowers). The most common reason for replacing the exhaust gasket is when the engine runs poorly.
All of the information for this exhaust gasket replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere
Tools needed: nut driver, socket wrench, flathead screwdriver
All of the information for this exhaust gasket replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere
Tools needed: nut driver, socket wrench, flathead screwdriver
Step-By-Step Instructions
1
Before you begin this repair, make sure the engine has cooled remove the wire and boot from the spark plug and turn off the fuel valve.
2
Your first step is to remove the screws and bolt securing the muffler guard.
3
Now pull the guard off.
4
Next, remove the mounting bolts securing the muffler itself and pull the muffler out to access the exhaust gasket.
5
If still intact, remove the old gasket.
6
Install the new exhaust gasket by positioning it in the cylinder head.
7
Now reinsert the muffler and align it with the gasket then secure both with the mounting bolts.
8
Reposition the guard and secure it with the screws and bolt.
9
With the new exhaust gasket in place, you can now turn the fuel valve back on and reattach the spark plug wire and boot.
Applicable Product Model
Parts Needed
Exhaust Gasket
$5.11
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com